Bosch UML-150-90 User Manual download pdf (Page 8)

8 en | Safety Bosch High Performance HD LED Monitors

F.01U.134.499 | 2.0 | 2012.10 User's Manual Bosch Security Systems, Inc.

Environmental statement - Bosch has a strong commitment towards the environment. This

unit has been designed to respect the environment as much as possible.

Electrostatic-sensitive device - Use proper CMOS/MOS-FET handling precautions to avoid

electrostatic discharge.

NOTE: Wear required grounded wrist straps and observe proper ESD safety precautions when

handling the electrostatic-sensitive printed circuit boards.

Fuse rating - For security protection of the device, the branch circuit protection must be

secured with a maximum fuse rating of 16A. This must be in accordance with NEC800 (CEC

Section 60).

Grounding and polarization - This unit may be equipped with a polarized alternating current

line plug (a plug with one blade wider than the other blade). This safety feature allows the

plug to fit into the power outlet in only one way. If unable to insert the plug fully into the

outlet, contact a locally certified electrician to replace the obsolete outlet. Do not defeat the

safety purpose of the polarized plug.

Alternately, this unit may be equipped with a 3-pole grounding plug (a plug with a third pin for

earth grounding). This safety feature allows the plug to fit into a grounded power outlet only.

If unable to insert the plug into the outlet, contact a locally certified electrician to replace the

obsolete outlet. Do not defeat the safety purpose of the grounding plug.

Moving - Disconnect the power before moving the unit. Move the unit with care. Excessive

force or shock may damage the unit and the hard disk drives.

Outdoor signals - The installation for outdoor signals, especially regarding clearance from

power and lightning conductors and transient protection, must be in accordance with NEC725

and NEC800 (CEC Rule 16-224 and CEC Section 60).

Permanently connected equipment - Incorporate a readily accessible disconnect device in

the building installation wiring.

Pluggable equipment - Install the socket outlet near the equipment so it is easily accessible.

Power resupply - If the unit is forced to power down due to exceeding the specified operating

temperatures, disconnect the power cord, wait for at least 30 seconds, and then reconnect

the power cord.

Power lines - Do not locate the display near overhead power lines, power circuits, or

electrical lights, nor where it may contact such power lines, circuits, or lights.

Rack-mount

– Ventilation - Do not place this unit in a built-in installation or rack without proper

ventilation or adhering to the manufacturer's instructions. The equipment must not

exceed its maximum operating temperature requirements.

– Mechanical loading - Properly mount the equipment in a rack to prevent a hazardous

condition due to uneven mechanical loading.

SELV

All the input/output ports are Safety Extra Low Voltage (SELV) circuits. SELV circuits should

only be connected to other SELV circuits.

Because the ISDN circuits are treated like telephone-network voltage, avoid connecting the

SELV circuit to the Telephone Network Voltage (TNV) circuits.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 40 41

Comments to this Manuals

No comments

Bosch UML-150-90 User Manual Page 8

Comments to this Manuals

Related products and manuals for TVs & monitors Bosch UML-150-90