Bosch GSN Specifications download pdf (Page 7)

English | 21

Bosch Power Tools 1 609 929 U15 | (8.12.09)

c)Do not use a pneumatic tool that has a defective

On/Off switch. A pneumatic tool that cannot be

controlled with the switch is dangerous and must be

repaired.

d)Disconnect the air supply before making any ad-

justments, changing accessories, or placing the

pneumatic tool aside. This safety measure prevents

accidental starting of the pneumatic tool.

e)Store idle pneumatic tools out of the reach of chil-

dren. Do not allow persons unfamiliar with the

pneumatic tool or these instructions to operate

the device. Pneumatic tools are dangerous in the

hands of untrained users.

f) Maintain the pneumatic tool with care. Check for

misalignment or binding of moving parts, breakage

of parts and any other condition that may affect

the pneumatic tool's operation. Have damaged

parts repaired before using the pneumatic tool.

Many accidents are caused by poorly maintained

pneumatic tools.

g)Use the pneumatic tool, accessories, application

tools, etc. according to these instructions. Take in-

to consideration the working conditions and the

activities to be carried out. Use of the pneumatic

tool for operations different from those intended

could result in hazardous situations.

5) Service

a)Have your pneumatic tool repaired only through a

qualified repair person and only using original re-

placement parts. This will ensure that the safety of

the pneumatic tool is maintained.

Safety Warnings for Compressed-air

Nailers/Staplers

Wear safety goggles.

f Always assume that the pneumatic tool is loaded

with fasteners. Careless handling of the pneumatic

tool can lead to unexpected shot actuation of fasten-

ers and cause injury.

f When working, hold the pneumatic tool in such a

manner that your head and body cannot be injured in

case of sudden kickback due to a malfunction of the

energy supply or from hard objects/locations in the

workpiece.

f Never point the pneumatic tool at yourself or at per-

sons close by. Unexpected actuation will expel a fas-

tener, which can lead to injury.

f Do not actuate the pneumatic tool until firmly placed

against the workpiece. When the pneumatic tool is not

in contact with the workpiece, the fastener can bounce

away from the fastening point and overload the pneu-

matic tool.

Do not work on ladders or scaffolds when

the actuation system “Contact actuation” is

set. In particular, do not move from one fas-

tening location to another, close boxes or

enclosures, or fasten transport-securing fix-

tures on e.g., vehicles and waggons, via scaf-

folds, stairs, ladders or ladder-like construc-

tions, such as roof battens. With this

actuation system, a fastener will be dis-

charged each time when accidentally apply-

ing the pneumatic tool while the discharge

lock-off is pressed in. This can lead to injury.

f Observe the conditions of the job site. It is possible

that fasteners can burst through thin workpieces or be

deflected when working in corners or against edges,

and harm persons.

Disconnect the air supply, when the fasten-

er is jammed in the pneumatic tool. When

the pneumatic tool is still connected to the

power supply, it can accidentally be actuated

when removing a jammed fastener.

f Use caution when removing a jammed or stuck fas-

tener. The system can be under tension and cause the

fastener to be shot or thrust out, while attempting to

clear the jam.

OBJ_BUCH-1037-001.book Page 21 Tuesday, December 8, 2009 1:03 PM

1 2 3 4 5 6 7 8 9 10 11 12 ... 16 17

Comments to this Manuals

No comments

Bosch GSN Specifications Page 7

Comments to this Manuals

Related products and manuals for Unknown Bosch GSN