Bosch WAWH2699SN User Manual download pdf (Page 37)

Programme default settings en

37

0 Programme default

settings

Programme default settings

The default programme settings are

displayed in the display panel after

selecting the programme.

You can change the default settings.

An overview of all programme settings,

which can be selected depending on

the programme, can be found from

~ Page 31.

Temperature

(s)

Depending on what stage the

programme is in, you can change the

set temperature before and during the

programme.

The maximum temperature that can be

set depends on the programme that has

been selected.

Spin speed

(0)

Depending on what stage the

programme is in, you can change the

spin speed (in rpm; revolutions per

minute) before and during the

programme.

Setting 0: The rinsing water is drained

but there is no final spin. The laundry

stays wet inside the drum, e.g. for items

that should not be spun.

Setting $: Rinse Stop = no final spin.

The laundry stays in the water after the

final rinse.

You can select “Rinse Stop” to prevent

creasing if the laundry will not be taken

out of the washing machine immediately

after the programme has ended.

To continue/end the programme

~ Page 43

The maximum speed that can be set

depends on the model and programme

that has been selected.

Ready in

(ñ)

Before starting the programme, you

can preselect the programme end

("Ready in" time) in hourly increments

(h = hour) up to a maximum of 24 hours.

To do this:

1. Select a programme.

The programme duration is displayed

for the selected programme, e.g.

2:30 (hours:minutes).

2. Press the Ready in button repeatedly

until the required number of hours is

displayed.

Note: The setting values are

increased using the Ready in +

button, and decreased using the

Ready in - button.

3. Press the A button.

The programme starts.

The selected number of hours (e.g. 8

h) is shown in the display panel and

counts down until the wash

programme starts. The duration of

the programme is then displayed.

Note: The length of the programme is

automatically adjusted when the

programme is running. Changes to the

default programme settings or

programme settings may also change

the programme duration.

After starting the programme (if a

Ready in time has been selected and

the wash programme has not yet

started), you can change the

preselected number of hours as follows:

1. Press the A button.

2. Use the Ready in - or + button to

change the number of hours.

3. Press the A button.

After starting the programme, you can

add or remove laundry if necessary.

~ Page 42

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 67 68

Comments to this Manuals

No comments