Bosch WLX20060PL Instruction Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
7
Programme overview (see also the information on page 6)
Progarmmes
max. load
(kg)
Type of laundry
Compartment
*
Woda
Plus
II ~ I
Baweĭna LF
30, 60 , 90
4,5 Hard-wearing textiles, heat-resistant textiles made of cotton or linen.
Baweĭna LF
Eco
40, 60
4,5
Hard-wearing textiles made of cotton or linen.
Baweĭna LF
+ P.wstċpne 7
60
4,5
Energy-intensive programme for heavily soiled hard-wearing textiles made from
cotton or linen.
Syntetyki
30, 40, 60
2,5 Easy-Care textiles made of cotton, linen, synthetic fibres or blended fabrics
Delikatne
30
2,0
For delicate, washable textiles, e.g.made of silk, satin, synthetic fibres or
blended fabrics
Weĭna O :
Zimna, 30
2,0
For hand and machine washable wool or wool-rich textiles,e.g. cashmere, ohair
or angora. Also suited for hand washable silk
Odpompowaie
>
Wirowanie Å
Pĭukanie 2
* : Obligate; : optional.
For further information and a selection of our products
go to our web site: http://www.bosch-home.com
or contact our customer service centres
Robert Bosch Hausgeräte GmbH
Carl -Wery-Str.34
D-81739 Munich/Germany
WLX20060PL
9000707449
0312
8
Cleaning and care
Clean machine housing, control panel
Wipe with a soft, damp cloth.
Do not use abrasive detergents.
Immediately remove washing and cleaning agent residue.
Do not clean the appliance with a water jet.
Clean the detergent drawer ...
... if it contains detergent or fabric softener residue.
1. Pull out, depress the insert and remove the drawer completely.
2. Remove insert: Press the insert upwards with your finger.
3. Clean the detergent dispenser and the insert with water and a brush.
4. Refit the insert and secure in place.
5. Insert the detergent drawer.
Leave the detergent drawer open so that residual water can evaporate.
Drum
Leave the washing machine door open so that the drum can dry.
Rust stains – use chlorine–free cleaning agent, not steel wool.
Descaling No laundry in the machine!
This should be not be necessary if the detergent is dispensed correctly. However, follow
the instructions of the descaler manufacturer.
Frost protection
If the washing machine is located in a room which is exposed to freezing temperatures, any
residual water in both the pump and the water inlet hose must be drained every time after the
machine is used.
– Draining the pump a
Page 9 Detergent solution pump
– Draining the water inlet hose:
1. Turn the tap off.
2. Unscrew the hose from the tap and the rear of the appliance, drain out the water left inside
the inlet hose.
3. Before the next wash, screw the hose back on and check for leaks.
Risk of electric shock!
Pull out the mains plug!
Risk of explosion! No solvents!
9
Cleaning and care
Detergent solution pump
– Set the programme selector to Wyĥaczenie, pull out the mains plug.
1. Open and remove the maintenance cover.
2. Carefully unscrew the pump cover - do not remove it completely.
3. Let the water drain into a shallow container (let the remainder drip
onto a floor cloth). Repeat the operation until there is no water left.
4. Remove the pump cover. Remove foreign material/fluff from inside the
pump.
5. Clean the interior, pump cover thread and pump housing
(fan impeller in the detergent solution pump must be able to rotate).
6. Refit the pump cover and screw on tightly.
7. Insert the maintenance cover and close it.
To prevent unused detergent from flowing into the outlet during the next
wash: pour 1 litre of water into dispenser II and start the Wirowanie
Å
programme.
Filter in the water inlet hose
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except Wirowanie Å and Odpompowaie >
).
3. Press Start/Pauza $. Leave programme running for approx. 40 seconds.
4. Set the programme selector to Wyĥaczenie. Pull out the mains plug.
Clean the filter:
1. Remove the hose from the tap.
Clean the filter with a small brush.
or
Remove the hose from the rear of the appliance.
Remove filter with pliers and clean.
2. Reconnect the hose and check for leaks.
1
2
1
2
Risk of scalding! Allow detergent
solution to cool down!
Turn off the tap!
10
Technical specifications
a= 600 mm
b= 400 mm
c= 850 mm
Net weight: 60kg
Customer service
ʑ
Before calling the customer service, please check whether you can eliminate the fault yourself
a page 11 What to do if...
ʑ
If yor require advice, even during the warranty period, you will incur the costs for the callout
of a technician.
ʑ
The contact details for all countries can be found in the enclosed after-sales service directory
ʑ
When calling customer service, please give the details of your address, telephone number,
fault description, purchase date, product number (E-Nr.) and the production number (FD) of
the appliance to prevent unnecessary call-outs. This will save your additional costs.
These numbers are shown on the rating plate
which can be found on the frame of the open
door and also on the rear of the appliance.
Rely on the professionalism of the manufacturer. Please contact us.
This will ensure that the repair is carried out by trained service technicians who arrive
equipped with genuine spare parts for your appliance.
a
b
c
E-Nr. FD
Product number Production number
11
What to do if ...
ʑ
Water is running out. Fit/refit drainage hose.
Tighten screw–fitting on the supply hose.
ʑ
Water not flowing in.
Detergent not washed in.
The
gotowa do pracy (Ready) and
koniec (End) indicator lights flash.
Tap not open?
Filter blocked? Clean filter
a Page 9.
Water inlet hose kinked or jammed?
ʑ
Washing machine door cannot be
opened.
Safety function active. Programme stopped?
Water in drum? Select
Wirowanie Å or Odpompowaie
>.
ʑ
Programme does not start.
The
gotowa do pracy (Ready) and
pĥukanie
(Rinse) indicator lights
flash.
Start/Pauza $ not selected.
Washing machine door not closed properly.
ʑ
Detergent solution is not drained.
The
pĥukanie (Rinse) and koniec
(End) indicator lights flash.
Clean detergent solution pump a Page 9.
Clean outlet pipe and/or drainage hose.
ʑ
Additional function could not
activate for selected programme.
Can the additional function be selected? a Page 7,
programme overview.
ʑ
Water not visible in the drum. Not a fault - water below the visible area.
ʑ
Spin cycle actuated several times. Not a fault - unbalanced load detection system adjusts
imbalance.
ʑ
Detergent in chamber I is not
washed away.
+ P.wstĊpne 760 programme not selected ?
ʑ
Detergent residue in the detergent
dispenser
Detergent is damp or lumpy, clean the detergent
dispenser a Page 8.
Use the dosing aid for liquid detergent.
ʑ
Foam is coming out of the
detergent drawer.
Too much detergent used?
Mix 1 tablespoon of fabric conditioner with ½ a litre of
water and pour into dispenser II in the detergent drawer.
Reduce detergent dosage for the next wash cycle.
ʑ
Excessive noise, vibrations and
”wandering” during spin cycle.
Appliance feet fixed?
Secure appliance feet
a Installation instructions.
Transportation bolt removed?
Remove transportation bolt
a Installation instructions.
ʑ
Indicator lights do not function
while the appliance is running.
Power failure?
Circuit breaker tripped? Reset the circuit breaker/
change the fuse.
If the fault occurs repeatedly, contact customer service.
ʑ
Programme sequence longer than
usual
Not a fault-unbalanced load detection system is
adjusting the imbalance by repeatedly distributing the
laundry .
Not a fault - foam detection sysytem active.
ʑ
Detergent residues on the laundry Occasionally, phosphate-free detergents contain water-
insoluble residues.
Select
Pĥukanie or blush the laundry after washing.
ʑ
Washing result not satisfactory Soiling is greater than expected? Select a suitable
programme or reduce load.
Detergent is underdosed?
ʑ
If you cannot correct a fault yourself or a repair is required:
Set the programme selector to
Wyĥaczenie and pull the mains plug out of the socket.
Turn off the tap and call the customer services.
Washing machine
en Instruction manual
WLX20060PL
Page view 1
1 2 3 4 5 6 7 8

Comments to this Manuals

No comments