Bosch MIC Series 400 User Manual download pdf (Page 17)

MIC Series 550 Camera Installation | en 17

Bosch Security Systems, Inc. Installation Manual F.01U.239.454 | 1.0 | 2011.04

Figure 5.2 Pan body fixing screws

3. Grasp the lower camera body beneath the pan body joint and then carefully twist the

upper camera body clockwise, as shown in Figure 5.3 below, until the camera body has

rotated 180° around. The top part of the camera will now be at a 45° angle (canted).

Figure 5.3 Canting in progress

4. Align the two (2) pan body fixing screws, then carefully replace and tighten them. The

camera is now ready to be installed and configured.

Figure 5.4 Camera in canted position; arrows point to pan body fixing screws (1) and security screws (2)

5.3 Adjusting the Rain Shield for Inverted Operation

The upright unit can be mounted with the camera ball up or down. When the camera will be in

inverted position, you should reverse the rain shield to provide weather protection for the

window glass.

Figure 5.5 Rain shield

NOTICE!

The small security screws (identified in Figure 5.4 below) are not designed to be removed. Any

attempt to remove these screws will void the warranty and potentially cause serious damage

to the camera.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 59 60

No comments

Bosch MIC Series 400 User Manual Page 17