Bosch VLG-4V0940-MP5 Datasheet Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 6
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
Technical specifications
Electrical
Power Supply 24 VAC 50/60 Hz
12 VDC
Power-over-Ethernet 48 VDC nominal
Current Consumption 500 mA (12 VDC)
450 mA (24 VAC)
175 mA (PoE 48 VDC)
Power Consumption 6 W (12 VDC)
10.8 W (24 VAC)
8.4 W (PoE 48 VDC)
Sensor
Type 1/3‑inch CMOS HD
Pixels 2048 x 1536 (3MP)
Video streams
Video compression H.264 (ISO/IEC 14496-10); M- JPEG,
JPEG
Streaming Multiple configurable streams in H.264
and M-JPEG, configurable frame rate and
bandwidth.
Regions of Interest (ROI)
Overall IP Delay Min. 120 ms, Max. 240 ms
GOP structure IP, IBP, IBBP
Encoding interval 1 to 30 (25) ips
Resolutions (H x V)
1080p HD 1920 x 1080
960p HD 4:3
(cropped)
1280 x 960
720p HD 1280 x 720
D1 4:3 (cropped) 704 x 480
SD upright
(cropped)
400 x 720
480p SD Encoding: 704 x 480;
Displayed: 854 x 480
432p SD 768 x 432
288p SD 512 x 288
240p SD Encoding: 352 x 240;
Displayed: 432 x 240
144p SD 256 x 144
Sensitivity (3200 K, scene reflectivity 89%, F1.2)
Minimum illumination (30 IRE)
Color 0.25 lx (0.025 fc)
Monochrome 0.08 lx (0.008 fc)
Day/Night Color, Monochrome, Auto
White Balance ATW (2500 to 10000K), ATWhold and
manual
Indoor and Outdoor ATW
Shutter Automatic Electronic Shutter (AES)
Fixed (1/30 [1/25] to 1/15000)
selectable
Default shutter
Backlight compensation Off/Auto/IntelligentAE
Wide dynamic range On/off
Noise reduction Intelligent Dynamic Noise Reduction
(iDNR) with separate temporal and spatial
adjustments
Contrast enhancement On/off
Sharpness Sharpness enhancement level selectable
Dynamic Range 90 dB typical
Privacy Masking Four independent areas, fully
programmable
Video Motion Analysis Intelligent Video Analysis
Audio
Standard AAC
G.711, 8kHz sampling rate
L16, 16kHz sampling rate
Signal-to-noise ratio > 50 dB
Audio Streaming Full duplex / half duplex
Input/output
Audio 1 x mono line in, 1 x mono line out
connector 3.5 mm stereo jack
signal line in 12 kOhm typical, 1 Vrms max
signal line out 1 Vrms at 1.5 kOhm typical,
Alarm 2 inputs
activation
voltage
+5 VDC to +40 VDC
(+3.3 VDC with DC-coupled 22 kOhm pull-
up resistor)
Relay 1 output
voltage 30 VAC or +40 VDC max.
Maximum 0.5 A continuous, 10VA
Data port RS‑232/422/485
4 | DINION HD 1080p HDR
Page view 3
1 2 3 4 5 6

Comments to this Manuals

No comments