Bosch B22CS30SNS Owner's Manual download pdf (Page 8)

8

Water connection

Have a technician install the

appliance and connect it to the

water supply according to the

enclosed installation instructions.

A cold water connection is required

for operation of the automatic ice

maker.

The water pressure must be

between 29 and 116 psi

(2.0–8.0 bar).

The installation must comply with

local plumbing regulations and local

and state laws.

A separate shut-off valve must be

installed for the appliance water

connection.

The shut-off valve for the water

connection must not be behind the

appliance. It is recommended to

place the shut-off valve directly next

to the appliance (base unit) or in

another easily accessible location.

Installing and

connecting the

appliance

 Have a technician install and

connect the appliance

according to the enclosed

installation instructions.

 After installing the appliance,

wait at least 1 hour until the

appliance starts up.

During transportation the oil in

the compressor may have

flowed into the refrigeration

system.

 Before switching on the

appliance for the first time, clean

the interior of the appliance

(see “Cleaning”).

 Always connect the water

before the power.

 Apart from statutory national

regulations, you should stick to

the connection terms relating to

the local electricity and water

companies.

 Do not remove the transpor-

tation protection devices from

the shelves and storage

compartments until the

appliance has been installed.

Aligning the appliance

To ensure that the appliance

functions correctly, it must be set

level with a spirit level.

If the appliance is not level, water

may flow out of the ice maker, ice

cubes may be irregular or the doors

may not close properly.

 Place the appliance in the

designated location.

 Align front feet with a hexagon

wrench.

 Align rear feet with an Allen key.

NOTICE

The maximum external diameter of

the water line (without connecting

pieces) is

13

/

32

" (10 mm).

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 75 76

Comments to this Manuals

No comments