Bosch DHI 645 F Operations Instructions download pdf (Page 12)

25

Preparing the wall cupboard

This extractor hood is designed to be

installed in a wall cupboard with the follo-

wing dimensions:

width: 600 mm

depth: 293 to 350 mm

height: min. 435 mm.

If the cupboard is deeper than 293 mm,

the extractor hood can be moved back,

e.g. to put a spice rack in front of the

extractor hood.

To do this, place the template

O

II further

back.

 Ensure that the cupboard is stable both

during and after installation, even if ﬁtted at

the end of a row of kitchen units.

1. Mark two attachment points on both the

right and left inside faces of the cup-

board and make holes with a bradawl.

When you drill:

2 mm diameter – max. 10 mm in depth.

Use the enclosed template

O

II to mark

the attachment points.

2. Screw on both attachment plates

3. Attach the door to the cupboard and

align.

 Observe the minimum distance

between hotplates and extractor hood!

Fig. 1.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19

Comments to this Manuals

No comments