Bosch NetDVR User's Guide download pdf (Page 12)

NetDVR

| User’s Guide | Installation

Bosch Security Systems | 2004-01

2.1.4 Connecting NetDVR to a Hub on Internet or LAN

• Connect the NetDVR to the network

hub using the white direct cable

(supplied).

Note:

A remote user cannot access the NetDVR until its

network settings have been assigned. It requires

an unoccupied IP address to be assigned.

Caution:

Do not use the default IP address. Within a

closed network, random IP addresses may be

assigned as long as each one is unique. For a

private network connected to the Internet, a

registered IP address is required (available from

your Internet service provider).

Note:

The network address of the local user and that of the NetDVR must be within the same network segment.

2.1.5 Connecting NetDVR directly to a PC

To configure the NetDVR locally, it

can be connected directly to a PC.

• Connect the NetDVR to the PC’s

LAN port using the crossover

cable (cable with red connectors,

supplied). Ensure that the local PC

and NetDVR both have their

network address set within the

same network segment.

2.1.6 Location

• Place the NetDVR appropriately

for your purpose. Mount the NetDVR on a stable surface and avoid shock and vibration

especially during operation.

MAC address

The 12-digit MAC address of the NetDVR is on a label on the bottom. To correctly enter

this address using the ARP command, enter the “-” as separator to form a string of 6 two-

digit characters, i.e. 00408C100086 becomes 00-40-8C-10-00-86.

TO AC OUTLET

DC 12V

ETHERNET

(SUPPLIED)

DIRECT CABLE

HUB

POWER SUPPLY

(SUPPLIED)

TO AC OUTLET

POWER SUPPLY

(SUPPLIED)

DC 12V

ETHERNET

(SUPPLIED)

CROSS OVER CABLE

NetDVR.book Page 12 Wednesday, May 12, 2004 4:06 PM

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 51 52

Comments to this Manuals

No comments

Bosch NetDVR User's Guide Page 12

Comments to this Manuals

Related products and manuals for Digital Video Recorders (DVR) Bosch NetDVR