Bosch NetDVR User's Guide download pdf (Page 30)

NetDVR

| User’s Guide | Configuring the NetDVR

Bosch Security Systems | 2004-01

• If the motion detect ‘MD’ or a sensor (S1~S4) check box is selected, the image is

recorded on the HDD with the 'Alarm Save’ setting, when that device triggers the alarm.

• Select the event devices for each of the five Time Table sections.

3.10.7 Quality Box

The quality box allows for selecting the area of

interest to full image quality (focus area) while

the remainder of the image is reduced in

contrast to reduce the amount of data to be

stored or transmitted.

• Click on the large button to open the

Quality Box configuration window.

• A quality box is configured by drawing a

rectangular area in the image.

• Move the mouse over the border and click

to resize or move inside the QBOX, click

and move the box.

• To clear a configured quality box, click the

mouse button out of selected area.

• Set the 'Attenuation level’ (1 to 5) to

determine the contrast of the image outside

the ‘focus area’.

Note:

Selecting attenuation level ‘1’ means the contrast level outside the ‘ focus area’ is almost the same as that

within the ‘focus area’. Selecting level ‘5’ means the image outside the ‘focus area’ is dark.

• Click on the OK button to enter the quality box settings.

• Check the quality box checkboxes for the time zones as required.

Click on the OK button to confirm the settings and return to the ‘Schedule’ main screen

NetDVR.book Page 30 Wednesday, May 12, 2004 4:06 PM

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 51 52

No comments

Bosch NetDVR User's Guide Page 30