Bosch B36ET71SN Owner's Manual download pdf (Page 13)

3. Removing the packaging

To protect the base from damage during installation:

 Attach a residual piece of carpet, lino, etc. to the floor

with adhesive tape in front of the intended installation

location.

 Move the appliance with a hand truck securely.

 Remove transportation packaging:

– Using adhesive tape, attach the power cord to the

back of the appliance.

– Remove transportation protection devices and lift

appliance off the pallet – appliance is very heavy!

– Remove accessories from the outside of the

appliance.

– Keep adhesive tape which was used to attach the

supplied accessories to the appliance.

It is used subsequently for attaching the edge

protection to the cavity walls (see Section 8.).

– Carefully open the appliance – risk of tipping over –

and remove accessories and installation materials

from inside the appliance. Close doors again!

 Check appliance for damage in transit.

Do not install the appliance if it is visibly damaged. If in

doubt, contact your dealer.

WARNING

– The appliance may tip over while it is being

unpacked.

– The appliance is very heavy.

– When opening the appliance door, the appliance

may tip forwards.

Be careful, otherwise people who are helping may be

injured or the appliance may be damaged.

CAUTION

Do not remove transportation protection device (A)

from the underside of the freezer compartment drawer.

Do not remove transportation safety devices which

protect the shelves and storage compartments inside

the appliance until the installation is complete,

otherwise the parts may be damaged.

CAUTION

Care should be taken when closing the door. The

folding rail attached to the door of the refrigerator

compartment has to be folded if the door are closed.

Risk of damage!

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 71 72

Comments to this Manuals

No comments

Bosch B36ET71SN Owner's Manual Page 13

Comments to this Manuals

Related products and manuals for Fridges Bosch B36ET71SN