Bosch NKG645D17G Instruction Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
9
Basic settings
Your appliance has various basic settings. You can adapt these
settings to your own preferences.
Changing the basic settings
The hob must be switched off.
1. Switch on the front left hotplate at heat setting 1.
2. Within the next 10 seconds, press and hold the D symbol
for 4 seconds
and flash alternately in the lower display and lights up in
the upper display.
3. Touch the D symbol repeatedly until the desired indicator
appears in the lower display.
4. Touch the ð symbol repeatedly until the desired setting
appears in the upper display.
5. Touch and hold the D symbol for 4 seconds.
The setting is activated.
6. Switch off the hotplate.
Cleaning and care
The information in this section provides help on how best to
care for your hob.
Suitable maintenance and cleaning products can be purchased
from the after-sales service or in our e-Shop.
Ceramic
Clean the hob after each use. This will prevent spills from
burning onto the ceramic.
Only clean the hob when it has cooled down sufficiently.
Use only cleaning agents which are suitable for glass ceramic.
Follow the cleaning instructions on the packaging.
Never use:
Undiluted washing-up liquid
Detergent intended for dishwashers
Scouring agents
Harsh cleaning agents such as oven spray or stain remover
Abrasive sponges
High-pressure cleaners or steam jet cleaners
Ground-in dirt can be best removed with a glass scraper,
available from retailers. Please note the manufacturer's
instructions.
You can also obtain a suitable glass scraper from our after-
sales service or from the e-Shop.
Using special sponges to clean glass ceramic achieves great
cleaning results.
Hob surround
To prevent damage to the hob surround, observe the following
instructions:
Use only hot soapy water.
Wash new sponge cloths thoroughly before use.
Do not use any sharp or abrasive agents.
Do not use the glass scraper.
Display Function
™‚
Automatic childproof lock
Switched off.*
Switched on.
™ˆ
Activation of the filament circuits
Switched off.
Switched on.
ƒ Last setting before the hotplate was switched off.*
™‹
Reset to basic setting
Switched off.*
Switched on.
* Basic setting
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments