Bosch PIE651F17E Instruction Manual download pdf (Page 10)

Changing or cancelling the time

Select the hotplate and then press the

0 symbol.

Change the cooking time using the programming zone or set

‹‹ in order to cancel the time.

Once the time has elapsed

The hotplate switches off. A warning signal sounds. The time

program function lights up

‹‹ for 10 seconds in the display.

When the

0 symbol is pressed, the indications turn off and the

beeping stops.

Notes

■ To program a cooking time of less than 10 minutes, always

press 0 before selecting the desired value.

■ If cooking times have been programmed for various zones,

the time program function always displays the time of the

selected hotplate.

■ Cooking times can be programmed for up to 99 minutes.

The timer

The timer can be set for periods of up to 99 minutes. It is

independent of the other settings. This function does not

automatically switch off a hotplate.

How to program

1. Press the 0 symbol until the U indicator lights up. ‹‹ lights

up in the time program function display.

2. Adjust the desired time in the programming zone.

The time starts to count down again after a few seconds.

Changing or cancelling the time

Press the

0 symbol and the U indicator lights up.

Change the cooking time in the programming zone or press 0

to cancel the time.

Once the time has elapsed

Once the time has elapsed, a beep will sound.

‹‹ and Uare

displayed in the time program function display. After pressing

the

0 symbol, the indications turn off.

Cleaning lock function

Cleaning the control panel while the hob is switched on may

change the settings.

In order to avoid this, the hob has a cleaning lock function.

Press the

> symbol. A signal sounds. The control panel is

locked for 35 seconds. The control panel surface can now be

cleaned without the risk of changing the settings.

Note: The lock does not affect the main switch. The hob may

be turned off when desired.

Automatic time limitation

If the hotplate remains in use for a long time and no changes

are made in the settings, the automatic time limitation function

is triggered.

The hotplate stops heating. The

”, ‰ symbol and the residual

heat indicator

œ/• flash alternately in the display.

The indicator goes out when any symbol is pressed. The

hotplate can now be reset.

When the automatic time function is used, it is governed by the

selected power level (from 1 to 10 hours).

Displaying energy consumption

This function displays total energy consumption for the time the

hob has been switched on.

After switching off the hob, the consumption in kWh is

displayed for 10 seconds.

An example is shown in the image with a consumption of

‚.‹‰ kWh.

The Basic Settings chapter provides information on activating

this function.

    

NZK

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Bosch PIE651F17E Instruction Manual Page 10

Comments to this Manuals

Related products and manuals for Hobs Bosch PIE651F17E