Bosch TDS1216 User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 116
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
11
en



For further details on the following actions, please refer
to the related chapters in this user manual.
 
with tap water and set the temperature control (15) to
“max”.
Plug in the appliance to the mains.
When the iron has reached the desired temperature,


control to the maximum position “max”.
Hold the iron horizontally and repeatedly press the
shot of steam button (6). Any residue may come out
of the soleplate (13).
If necessary, carefully clean the soleplate (13) down
with a dry, folded cotton cloth.
 
not use it on your laundry, as there may still be dirt in
the steam dispenser.
 
smell and emit a little smoke and a few particles; this
will stop after a few minutes.
 

 
        

Use only clean water from the tap without mixing
anything with it. The addition of other liquids, (unless
recommended by Bosch) such as perfume, will
damage the appliance.


Do not use condensation water from tumble dryers,
air conditioning systems or similar. This appliance
has been designed to use normal tap water.
To prolong the optimum steam function, mix tap water
with distilled water 1:1. If the tap water in your district
is very hard, mix tap water with distilled water 1:2.
You can inquire about the water hardness with your
local water supplier.
 


Check the temperature instructions shown on the
care label of the garment you are ironing.
Set the temperature control (15) to the corresponding
position by lining it up with the temperature index (14)
on the iron:
Synthetics
•• Silk-Wool
••• Cotton-Linen
Sort your garments based on their care labels, always
starting with clothes that have to be ironed at the
lowest temperature.
If you are unsure what type of material the garment
is made from, start ironing on the lowest temperature
setting and increase accordingly. If the garment is
made from mixed fabrics, set the temperature for the
most delicate material.
For silk, woollen or synthetic materials iron the
reverse side of the fabric to prevent shiny patches.
Avoid using the spray function to prevent stains.

Your iron is equipped with a steam setting selection
button  and with indicator lamps  showing the
steam setting, according to the table below:
Steam
setting
eco
max
steam off
Indicator
lamps

Green

Red

Off
Steam can be generated by gripping the handle (1), or
by pressing the steam activation button (2).
If the eco steam mode is selected, the energy
consumption of the appliance will be reduced by means
of reduction of electricity and water consumption. A
good ironing result can be obtained on this setting for
most garments.
The steam setting can be changed by pressing the
steam setting selection button (4). The iron runs through
the following cycle:
eco
max
steam off

The “SensorSteam” function automatically switches
off the iron when the handle is no longer gripped, thus
increasing safety and energy saving.

The soleplate (13) heats up to the temperature
corresponding to the selected setting.
The steam generation is blocked.
 
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 115 116

Comments to this Manuals

No comments