Bosch TDS1216 User Manual download pdf (Page 13)

 

Depending on the model, this range of irons is equipped

with the following de-scaling features “AntiCalc”.



        

pump prevents scale impairing the steam generation

system and ensures the optimum production of steam.



The “anti-calc” cartridge has been designed to

reduce the build-up of scale produced during steam

ironing, helping to extend the useful life of your iron.

Nevertheless the “anti-calc” cartridge cannot prevent all

of the scale that is produced naturally over time.



The “calc’n clean” function helps to remove scale

particles out of the steam chamber. Use this function

approximately every 2 weeks, if the water in your area

is very hard.

Follow the procedure described below:

a) Remove the plug from the socket, ensure that the

iron has cooled down and that the water tank (11) is

empty.

b) Set the temperature control (15) to the “calc‘n clean”

setting.

c) Fill the water tank (11) to the maximum level with

clean tap water.

d) Plug in the iron and select the maximum steam

setting “max” by pressing the steam selection button

(4).

e) Hold the iron over a sink or a container to collect the

water.

f) Grip the handle (1) until the water tank (11) is empty.

This could take several minutes.

g) Repeat the procedure until particles no longer come

out of the soleplate (13) of the iron.

h) Turn the temperature control (15) to the maximum

setting. The iron will begin to emit steam. Wait until

the water inside the iron has evaporated.

i) Clean the soleplate (13) of the iron.



(model dependent)

       

supplied.

This should be carried out every 3 months.



sales service or from our website..

Accessory code

(After-sales)

Name of accessory

(Online shop)

311144 TDZ1101

Follow the procedure described below:

a) Remove the plug from the socket, ensure that the

iron has cooled down and that the water tank (11) is

empty.

b) Set the temperature control (15) to the “calc‘n clean”

setting.

c) Fill the water tank (11) with tap water mixed with a



d) Plug in the iron and select the maximum steam

setting “max” by pressing the steam selection button

(4).

e) Hold the iron over a sink or a container to collect the

water.

f) Grip the handle (1) until the water tank (11) is empty.

This could take several minutes.

g) Then follow the procedure described above in section

“3. calc‘n clean” until particles no longer come out of

the soleplate (13) of the iron.



If the temperature control (15) is set too low (below “••”),

the steam is automatically switched off to prevent water

from dripping out of the soleplate (13).

The “ActiveControl Advanced” indicator lamp (3) on the



 

(model dependent)

The fabric-protection is used for steam-ironing delicate

garments at maximum temperature without damaging

them.

Use of the protector also does away with the need for a

cloth to prevent shine on dark materials.



of the garment to see if it is suitable.

To attach the fabric protector to the iron, place the tip

of the iron into the end of the fabric protector and press

the rear of the protector upward until you hear a click.

To release the fabric protector, pull down on the clip at

the rear and remove the iron.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 115 116

Comments to this Manuals

No comments

Bosch TDS1216 User Manual Page 13

Comments to this Manuals

Related products and manuals for Irons Bosch TDS1216