Bosch IntuiKey Installation Guide download pdf (Page 17)

EN | 13

Bosch Security Systems | 2005-09 | V3.0 Installation and Setup

Installation and Operating Manual | VIDOS IntuiKey

4. In the Properties dialog box, assign the camera or the encoder a number.

It makes sense to start the numbering from 1 and to assign successive

numbers to subsequent cameras. The user can then use the Previous/Next

camera soft keys to successively connect cameras to a monitor.

5. Close the Properties dialog box with OK.

6. Repeat steps 2 to 5 for each installed camera to which the user will be given

access.

7. Repeat steps 2 to 5 for each installed hardware monitor.

Once again, it makes sense for the first monitor to be given the number 1 and

all subsequent monitors to be numbered consecutively.

8. VIDOS is not closed – if the VIDOS IntuiKey is used to make connections,

VIDOS controls the connection between cameras and monitors in the

background.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 37 38

No comments

Bosch IntuiKey Installation Guide Page 17