Bosch 540H User Manual download pdf (Page 31)

Robert Bosch LLC MMD 540H Instruction Manual | Version 1 | February 2008

Maintenance

Replacing the Battery

WARNING: To avoid electric shock, disconnect the test leads

from any source of voltage before removing the battery door.

When the batteries become exhausted or drop below the

operating voltage, “BAT” will appear in the right-hand side of the

LCD display. The battery should be replaced.

Follow instructions for installing battery. See the Battery

Installation section of this manual.

Dispose of the old battery properly.

WARNING: To avoid electric shock, do not operate your meter

until the battery door is in place and fastened securely.

Battery Installation

WARNING: To avoid electric shock, disconnect the test leads

from any source of voltage before removing the battery door.

Disconnect the test leads from the meter.

Open the battery door by loosening the screw using a Phillips

head screwdriver.

Insert the battery into battery holder, observing the correct

polarity.

Put the battery door back in place. Secure with the two screws.

WARNING: To avoid electric shock, do not operate the meter

until the battery door is in place and fastened securely.

NOTE: If your meter does not work properly, check the fuses and

battery to make sure that they are still good and that they are

properly inserted.

30 | MMD 540H Hybrid Multime

ter | Maintenance

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 101 102

No comments

Bosch 540H User Manual Page 31