Bosch HBE5451UC Installation Manual download pdf (Page 5)

Before You Begin

Tools and Parts Needed

▯ Philips head screwdriver

▯ 1/8" drill bit and drill

▯ Measuring tape

Parts Included

Built-in oven

Power Requirements

The outlet must be properly grounded in accordance with

all applicable codes.

Preparing the units

▯ Safe use of this appliance can only be guaranteed if it

has been installed professionally in accordance with

these installation instructions. The installer shall be

liable for damages incurred as a result of incorrect

installation.

▯ Fitted units must be heat-resistant up to 195°F (90°C),

and adjacent unit fronts up to 160°F (70°C).

▯ Cut-out work on the units and worktop should be

performed before fitting the appliances. Remove any

shavings as they may impair the function of the

electrical components.

Removing Packaging

NOTICE: To prevent damage to your floor keep the unit

in its packaging base until ready to be placed in the

cabinet opening. Do not slide the unit across the flooring.

Different models use different packaging materials.

Actual brackets may look differently. Bracket remains in

packaging base.

Cut straps on outside of box.

Remove cardboard box.

Remove all top and side cardboard and Styrofoam

braces.

Place oven in front of cabinets where it is to be

installed.

1 2 3 4 5 6 7 8 9 10 ... 27 28

No comments

Bosch HBE5451UC Installation Manual Page 5