Bosch Appliances Home Security System IVMD 1.0 User Manual download pdf (Page 35)

IVMD | Configuration instructions Area settings | en 33

BOSCH Security Systems 1.0 | 2006.04

An object motion filter (if set) is shown by additional moving

white (maximum limit) and yellow (minimum limit) squares

being displayed inside the direction indicator.

4.5 Sensitive area

The sensitive area is that part of the image seen by the camera

that is analyzed. Objects moving outside the sensitive area can-

not generate an alarm event even if they are caught by the cam-

era.

Only objects moving inside the sensitive area are detected as

such and generate an alarm event.

The larger the sensitive area, the more computing power is

required, and data will be processed more slowly.

A smaller sensitive area means that data processing is faster.

The sensitive area is shown in yellow hatching.

In the default setting, the whole of the image captured by the

camera is defined as the sensitive area. Any areas that consist

of small squares can be defined as non-sensitive (or again as

sensitive). There are four editing tools you can use for this pur-

pose. You can also repeat this operation as often as you like to

achieve a very precise definition of the sensitive area.

NOTE!

Grapic display is adjusted to the size of the detector. For better

visibility, either create a detector large enough or resize the

whole window.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 43 44

No comments

Bosch Appliances Home Security System IVMD 1.0 User Manual Page 35