Bosch VSS7390/01T Installation Manual Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 14
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
Bosch Security Systems | 2003-06
VSS7390/01T Switcher | Installation Manual | Chapter 2 EN | 6
Note
For detailed information on the on screen menus refer
to the System Settings Part.
When completed the following screen will appear:
2.4 SYSTEM SETTINGS
The system settings can be configured to your own
requirements. The system is setup via on-screen menus.
To access the menu options:
Press the MENU button. Toggle to switch on/off.
The ROTARY wheel controls the menu navigation as
described in the Operation Instructions.
At the end of this chapter you will find the complete
menu structure in a diagram.
2.4.1 Main Menu
After pressing the menu button the following menu will
be displayed:
Note
HISTORY, SWITCH TO PLAYBACK VIEW,
VIEW SETTINGS and TIME/DATE functions are
described in detail in the Operation Instructions.
Remark
After entering the system settings, alarms are disabled.
2.4.2 System Settings Menu
With the System settings menu you can configure the
system according to your own requirements.
Configurations that can be changed are:
Select system settings from the main menu and the
following menu will appear:
2.4.3 Sequence
You can change the sequence dwell time from 01 sec to
30 secs. Sequence/dwell time is the length of time an
image is displayed before the next image in the
sequence is shown.
2.4.4 Alarms
The Alarm Profiles can be accessed from the Alarm
menu.
CONFIGURATION
WIZARD COMPLETED
MAINMENU
HISTORY
SWITCH TO PLAYBACK VIEW
VIEW SETTINGS
TIME / DATE
SYSTEM SETTINGS
MAIN MENU
SYSTEM SETTINGS
SEQUENCE
ALARMS
AUX-OUTPUT
RECORDER
INSTALLATION
SERVICE
MAIN MENU
SYSTEM SETTINGS
SEQUENCE
DWELL TIME 05 SEC
MAIN MENU
SYSTEM SETTINGS
ALARMS
ALARM DURATION 05 SEC
AUTO ACKNOWLEDGE OFF
ALARM PROFILE DAY
ALARM PROFILE NIGHT
DAY / NIGHT SWITCH NONE
ALARM
DURATION
This defines the period of time (5
sec. to 15 min.) that the alarm
beeper and the alarm relay are acti-
vated, unless the operator acknow-
ledges the alarm.
AUTO
ACKNOWLEDGE
ON/OFF When there is an alarm,
the system automatically acknow-
ledges the alarm and replays the
event (if event replay is activated)
after the programmed alarm duration
has expired (can be set from 5 sec.
to 15 min).
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments