Intrusion Systems | Conettix D6600 Communications Receiver/Gateway
The D6600 Communications Receiver/Gateway with
Conettix IP hardware components works in the following
configurations:
•
Telephone line communications over the public
switched telephone network (PSTN).
•
Internet or intranet communications over a LAN or WAN
using standard user datagram protocol and internet
protocol (UDP/IP).
•
Simultaneous PSTN and LAN or WAN communications.
The network environment reduces signal-reporting time and
provides instant notification when a site experiences
communication problems. A D6600 with Conettix IP
hardware is compatible with most manufacturer’s fire and
security system control panels. With Bosch Security
Systems’ control panels, high speed remote programming
over the network is also possible.
System Overview
PSTN Communications Configuration
This configuration uses existing telephone lines. A control
panel's signal transmits over a PSTN analog telephone line
to the D6600 Communications Receiver/Gateway. The
D6600 translates the signal to a common data format and
sends the signal through Ethernet LAN, WAN, or RS-232 to
a central station automation system.
Internet or Intranet Communications Configuration
This configuration requires Conettix IP hardware
components, uses existing Internet or intranet structures,
and avoids additional telephone service costs.
This configuration permits the D6200 Programming
Software to connect to the D6600 remotely. A control
panel's signal transmits over the LAN or WAN to the D6600
Communications Receiver/Gateway. The D6600 translates
the signal to a common data format and sends the signal
through Ethernet LAN, WAN, or RS-232 to a central station
automation system. The central automation system sends
information to operator workstations.
D6200 Programming Software
D6200 Programming Software is a PC-based application
that allows users to view, change, upload, and download
D6600 programming parameters through a network
connection or RS-232 serial port. Through the D6200
Programming Software users can edit CPU and line card
parameters; view the status of all accounts in the
databases; add, edit, and delete accounts; and configure
network operations.
Note D6200 Programming Software works with the
following operating systems and associated
service packs: Microsoft
®
Windows
®
98,
Windows 98 Second Edition, Windows Me,
Conettix D6600 Communications Receiver/
Gateway
▶
32 lines for public switched telephone network (PSTN)
communications
▶
Up to 3200 accounts for local-area network (LAN) or
wide-area network (WAN) communications
▶
Telephone line terminator cards for isolation and
transient suppression
▶
Front panel access to CPU card and hot-swappable line
cards
▶
Supports one D6690 SAFECOM Line Card for long-
range radio system capability
▶
Two-way audio
▶
Caller ID, ANI, and DNIS
▶
NIST AES Certification for Network Communications
▶
Supports 128-bit AES Rijndael encryption
www.boschsecurity.com
Comments to this Manuals