Bosch HBC36D754B Instruction Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
9
Current temperature
Press the
° button.
The current temperature is displayed for 3 seconds.
Changing the temperature
You can change the temperature at any time.
1. Press the X or Y button until the temperature is
highlighted.
2. Change the temperature using the rotary selector.
The change is adopted automatically.
Pause
Briefly press the
n button to interrupt cooking (pause). The
cooling fan may continue to run. Press the
n button to start.
If you open the appliance door during cooking, operation is
interrupted. Close the appliance door and press the
n button
to restart.
If you have set the basic setting "Continue operation after
closing door" to "automatic", restarting is not required (see
section: Basic settings).
"Fill water tank" message
If the water tank is empty, a signal sounds. "Fill water tank"
appears in the display. Cooking is paused.
1. Open the appliance door carefully.
Hot steam will escape.
2. Take out the water tank, fill to the "max" mark and reinsert.
3. Press the n button.
Switching off the appliance
ã=Risk of scalding!
Hot steam may escape when the appliance door is opened.
Open the appliance door carefully during or after cooking.
When opening the door, do not lean over it. Ensure that,
depending on the temperature, steam is not visible.
Press and hold the
n button to end cooking. If you have set a
cooking time, cooking is ended automatically. A signal sounds.
Press the
% button to switch off the appliance.
The cooling fan may continue running when you open the
appliance door.
After each use
Emptying the water tank.
1. Open the appliance door carefully.
Hot steam will escape.
2. Remove and clean the water tank.
3. Thoroughly dry the seal in the tank cover and the tank recess
in the appliance.
Caution!
Do not dry the water tank in the hot cooking compartment. This
will damage the water tank.
Drying the cooking compartment
ã=Risk of scalding!
The water in the evaporator dish may still be hot. Allow it to cool
before wiping.
1. Leave the appliance door ajar until the appliance has cooled
down.
2. Once it has cooled down, wipe out the cooking compartment
and the evaporator dish with the enclosed cleaning sponge
and dry well with a soft cloth.
3. Remove food residues from the cooking compartment as
soon as the appliance has cooled. Burnt-on remains will be
much harder to remove later.
4. Wipe kitchen units or handles if condensation has formed on
them.
Recommended settings
If you choose a dish from the recommended settings, the ideal
setting values are already specified.
You can choose from many different categories. Our
recommended settings include a large number of dishes from
cakes, bread, poultry, meat, fish and game to bakes and
convenience products.
The dishes can be found via several selection levels. Try it out.
see for yourself the variety of dishes.
1. Press the 8 button.
"Hot air 160 °C" appears in the display.
2. Turn the rotary selector anti-clockwise to "Recommended
settings".
The first food category appears in the display.
3. Press the X button to switch to the food category and select
the required category by turning the rotary selector.
(Use the
X button to move to the next level. Use the rotary
selector to make your next selection).
The setting for the selected dish then appears. You can
change the temperature and cooking time, but not the type of
heating.
4. Press the n button.
Cooking starts. The cooking time appears in the display and
starts to count down.
The cooking time has elapsed
A signal sounds. The appliance stops heating. 00:00:00 is
shown in the display.
Press the
0 button to stop the signal.
Changing the temperature
You can change the temperature at any time using the rotary
selector.
Changing the cooking time
Press the
0 button. Switch to cooking time using the rotary
selector. Press the
X button and turn the rotary selector to
change the cooking time. Exit the time-setting options with the
0 button.
Checking information
Press the
° button.
For more information, press the
° button again.
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Comments to this Manuals

No comments