Bosch MUC88B68RU Instruction Manual download pdf (Page 18)

18

en Additional functions

■ If a preparation programme has been

aborted.

■ If the pressure locking handle cannot

be opened because the appliance is not

completely depressurised.

W Risk of scalding!

When pressing the steam release button,

hot steam escapes from the steam outlet

under high pressure. Never bend over the

appliance while the steam release button is

being pressed!

1. Keep the steam release button pressed

until no more steam escapes from the

steam outlet.

2. Open the appliance. Open the pressure

locking handle for this purpose (M)

and press the opening button on the

basic appliance.

Note: If the pressure locking handle cannot

be opened, the appliance is not completely

depressurised. In this case, manually

depress the overpressure protection using

a thin pin until no more steam escapes

from the appliance. Then open the pressure

locking handle (M) and press the opening

button on the basic appliance.

Additional functions

The following additional functions are

available for preparation programmes with

and without steam pressure function.

Selecting a pre-congured

preparation time

Thepre-conguredpreparationtimeof

the level [средняя] (medium) is shown

on the control panel for each preparation

programme.

The preparation time can be shortened

[короткая]or lengthened [длинная].

1. Keep pressing button E until the

desired indicator is lit. The display

changes from [средняя] (medium)

to [длинная] (longer) and then to

[короткая] (shorter) before returning to

[средняя] (medium).

Thecorrespondingpre-conguredvaluesfor

the preparation time are shown in the display.

2. Press button G to start the preparation

programme.

Setting a start time delay

The start time delay can be set for the

selected preparation programme so you

can enjoy a freshly prepared meal at a

specictime.

Note: the start time delay can only be

set for certain preparation programmes.

Thepre-conguredstarttimedelayvaries

among these preparation programmes.

1. Select the preparation programme.

2. Press button A. Button Gashes.

“00:10”ashesinthedisplay.

Press button A repeatedly to increase the

displayed time. A brief press increases the

time by 5 minutes. A slightly longer press

increasesthetimeby10minutes.Pressing

and holding button A for around 2 seconds

increasesthetimeby30minutes.

3. Press button G when the desired start

time delay is displayed.

The desired start time delay is shown in

the display. [таймер] (timer) lights up in

the display. The time until the start counts

down. Once this time has elapsed, the

preparation process starts automatically.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 93 94

Comments to this Manuals

No comments