Bosch MUC88B68RU Instruction Manual download pdf (Page 21)

 21

en

Customised setting options

8. Press button G to start the preparation

programme.

Once the preparation programme ends,

an audible signal sounds and button G

ashes.

9. Open the lid of the appliance.

10. Lift the top part and the bottom part of

the steamer insert out of the pan.

Customised setting options

Thepre-conguredvaluesfortheprepara-

tion time and the preparation temperature

or steam pressure can be adapted to indi-

vidual needs and the recipe guidelines.

Setting the preparation time

1. In function selection mode, keep

pressing button D until the desired

preparation programme is selected.

The corresponding LED lights up in the

controlpanelandthepre-conguredprepa-

ration time for this preparation programme

is shown.

2. Press button F once.

Thepre-conguredpreparationtimeashes

in the display.

3. Keep pressing button F until the desired

preparation time is displayed.

When button Fisbrieypressed,the

preparationtimeisincreasedby1minute.

Thetimeincreasesuptothepre-congured

maximum value and then returns to the

pre-conguredminimumvalue.When

button F is pressed for a longer period,

the preparation time is increased by

10minutes.

4. Once the desired preparation time is

displayed, press button G.

The preparation programme with the set

preparation time is started.

If the time needs to be adjusted individually

for all preparation steps in a selected

programme, then repeat points 2 to 4 prior

to starting the respective preparation step.

Note: These settings are not saved. If this

preparation programme is selected again,

thepre-conguredpreparationtimewillbe

shown in the display once more.

Setting the preparation

temperature

For preparation programmes without the

steam pressure function, the temperature

can be selected individually.

1. In function selection mode, keep

pressing button D until the desired

preparation programme is selected.

The corresponding LED lights up in the

controlpanelandthepre-conguredprepa-

ration time for this preparation programme

is shown.

2. Press button C once.

Thepre-conguredpreparationtemperature

ashesinthedisplay.

3. Keep pressing button C until the desired

preparation temperature is displayed.

When button Cisbrieypressed,the

preparation temperature is increased by

5°C.Thetemperatureincreasesuptothe

pre-conguredmaximumvalueandthen

returnstothepre-conguredminimum

value. When button C is pressed for a

slightly longer period, the temperature is

increasedby10°C.

4. Once the desired preparation

temperature is displayed, press

button G.

The preparation programme with the set

preparation temperature is started.

If the temperature needs to be adjusted

individually for all preparation steps in a

selected programme, then repeat points

2 to 4 prior to starting the respective

preparation step.

Note: These settings are not saved. If this

preparation programme is selected again,

thepre-conguredpreparationtimewillbe

shown in the display once more.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 93 94

Comments to this Manuals

No comments