Bosch D1260 User Manual download pdf (Page 14)

100

D1260/D1260B | Owner's Manual | Part I: Security system basics - Silencing an Alarm

14 Bosch Security Systems | 9/04 | 50410D

Entry Delay Tone and Display

When you enter an armed system through a point

programmed for entry delay, the keypad emits a

repeating warble tone and displays the following to

remind you to turn off your security system.

If you fail to turn off the security system before the

entry delay time expires, it may sound the burglary

tone and may also send an alarm report to your

security company.

Exit Delay Tone and Display

After you arm your system, the keypad emits a

repeating beep tone, displays

AREA 1 NAME TEXT

is now arming…

then

EXIT NOW!

and counts down the exit delay time.

Keystroke Checking Tones

Valid Entry

If you press an appropriate key for the function or

entry you desire, the keypad emits a muted beep tone,

indicating it accepted your keystroke.

Invalid Entry

A flat buzz tone sounds when you perform a function

that is not allowed or when the keypad has no

information to display.

Silencing an Alarm

The audible alarm sounds for a specific period of time

before it automatically shuts off. If an alarm occurs and

you want to silence the siren before the time expires,

simply enter your personal passcode and press

ENTER.

To SILENCE an alarm:

Enter your passcode and press ENTER.

How Your System Reports Alarms

Your security system may be programmed to

automatically disconnect your telephones when

sending reports to your security company. Once the

report is completed, your security system returns the

telephones to normal operation (check with your

security company). Other methods of communicating

alarm conditions are also available. Please consult your

security company for services available in your area.

Your system makes repeated attempts to send reports

to your security company.

In the event your security system fails to communicate,

the keypad sounds a Trouble Tone and displays

AREA

1 WAREHOUSE Comm Fail Route Grp1

(where the

Route Group can be 1, 2, 3, or 4):

Notify your security company of the communications

failure.

If your system uses telephone lines as its

means of communication and telephone

service is interrupted, your security

system cannot send reports to your

security company unless it has an

alternate means of transmitting them.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 99 100

Comments to this Manuals

No comments

Bosch D1260 User Manual Page 14

Comments to this Manuals

Related products and manuals for Safety Bosch D1260