Bosch UPH-3D User Manual download pdf (Page 11)

CTFID Connections | en 11

Bosch Security Systems, Inc. User’s Manual F.01U.173.603 | 3.12 | 2010.11

3.3 Connecting RS-232 to an AutoDome camera

Figure 3.4 Connecting RS-232 to an AutoDome

Connecting the AutoDome to Your PC

1. Make the RS-232 cable using the table below.

2. Connect the DB9 connector to the comm port of the PC.

3. Connect P105 to the AutoDome.

4. Use coax to connect the Video output of the AutoDome to a CCTV monitor.

5. Reposition the slide switch located on the main board of the AutoDome. Slide the switch

toward the camera head, inward and away from the LEDs. See Figure 3.5.

Figure 3.5 RS-232

Number Description

1 AutoDome 200, 300, and 500 Series

2 PC running CTFID software

3RS-232

4 Coax to input of monitor

5 Typical CCTV monitor

Pin # Description

PC DB9

2RxD

3 TxD

5GnD

P105 (AutoDome 200, 300, 500)

5RxD

4 TxD

6GnD

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 51 52

No comments

Bosch UPH-3D User Manual Page 11