Bosch X10 User Manual Page 63
- Page / 132
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
VideoJet X10 Configuration Using a Web Browser | en 63
Bosch Security Systems Installation and Operating Manual V3.0 | 2007.09
5.22.4 Destination password
If the remote station is password protected, enter the password here.
In this page, you can save a maximum of ten destination IP addresses and hence up to ten
passwords for connecting to remote stations. If connections to more than ten remote stations
are to be possible, for example when initiating connections via higher-ranking systems such as
VIDOS or Bosch Video Management System, you can store a general password here. The
VideoJet X10 can use this general password to connect to all remote stations protected with
the same password. In this case, proceed as follows:
1. Select 10 from the Number of destination IP address list field.
2. Enter the address 0.0.0.0 in the Destination IP address field.
3. Enter your chosen password in the Destination password field.
4. Define this password as the user password for all remote stations to which a connection
is to be possible.
5.22.5 Video transmission
If the unit is operated behind a firewall, TCP (HTTP Port) should be selected as the transfer
protocol. For use in a local network, select UDP.
5.22.6 Remote port
Depending on the network configuration, select a browser port here. The ports for HTTPS
connections will be available only if the On option is selected in the SSL encryption
parameter.
5.22.7 Video output
If you know which unit is being used as the receiver, you can select the analog video output to
which the signal should be switched. If the destination unit is unknown, it is advisable to
select the First available option. In this case, the image is placed on the first free video
output. This is an output on which there is no signal. The connected monitor only displays
images when an alarm is triggered. If you select a particular video output and a split image is
set for this output on the receiver, you can also select from Decoder the decoder in the
receiver that is to be used to display the alarm image.
5.22.8 Decoder
Select a decoder of the receiver to display the alarm image. The decoder selected has an
impact on the position of the image in a split screen. For example, you can specify via a VIP XD
that the upper-right quadrant should be used to display the alarm image by selecting
decoder 2.
i
NOTICE!
If you enter the destination IP address 0.0.0.0 for destination 10, the VideoJet X10 will no
longer use this address for the tenth attempt at automatic connection in the event of an
alarm. The parameter is then used only to save the general password.
!
CAUTION!
Please note that in some circumstances, a larger bandwidth must be available on the network
for additional video images in the event of an alarm, in case Multicast operation is not
possible. To enable Multicast operation, select the UDP option for the Video transmission
parameter here and on the Network page (see Section 5.28.5 Video transmission, page 78).
i
NOTICE!
Refer to the destination unit documentation concerning image display options and available
video outputs.
- VideoJet X10 1
- Table of Contents 3
- 10 Specifications 125 5
- 10.1 Unit 125 5
- 10.2 Protocols/Standards 126 5
- 11 Index 127 5
- 1Preface 7
- 1.4 EU Directives 8
- 1.5 Rating Plate 8
- 2Safety Information 9
- 3 Product Description 11
- 3.2 System Requirements 12
- 3.3 Overview of Functions 13
- 3.3.13 Summary 15
- 4 Installation 19
- 4.3 Connections 20
- 4.3.4 SFP Slot 21
- 4.3.5 Direct iSCSI Connection 21
- 4.3.6 CF Slot 21
- 4.3.7 Data Interface 22
- 4.3.8 Alarm Inputs 22
- 4.3.9 Relay Outputs 23
- 4.3.11 Backup Power Supply 24
- 4.4 Power On/Power Off 25
- 4.5.3 Reboot 26
- 4.5.4 Additional Parameters 26
- 5.1 Connecting 27
- 5.2 Configuration Menu 29
- 5.2.1 Starting Configuration 30
- 5.2.2 Navigation 30
- 5.2.3 Making Changes 30
- 5.3 Identification 31
- 5.4 Camera Name 31
- 5.5 Display Stamping 32
- 5.5.4 Alarm message 33
- 5.5.5 Video watermarking 33
- 5.6 Password 34
- 5.7 Language 35
- 5.8 Date/Time 35
- 5.9 Time Server 35
- 5.9.1 Unit time zone 36
- 5.9.2 Daylight saving time 36
- 5.9.3 Time server IP address 36
- 5.9.4 Time server type 36
- 5.10 Picture Settings 37
- 5.11 Encoder Profile 38
- 5.11.1 Active profile 39
- 5.11.2 Preview for 39
- 5.12 Profile Configuration 40
- 5.12.8 I-frame distance 42
- 5.12.9 P-frame quality 42
- 5.12.10 I-frame quality 42
- 5.13 Video Input 43
- 5.14 Audio 44
- 5.15 JPEG Posting 45
- 5.15.3 Posting interval 46
- 5.15.4 FTP server IP address 46
- 5.15.5 FTP server login 46
- 5.15.6 FTP server password 46
- 5.15.7 Path on FTP server 46
- 5.16 Storage Medium 47
- 5.17 iSCSI 48
- 5.17.10 Storage Information 50
- 5.18 Partitioning 51
- 5.18.1 Creating a Partition 52
- 5.18.2 Saving Changes 53
- 5.18.3 Partition status 53
- 5.18.6 Partition number 54
- 5.18.4 Editing a Partition 54
- 5.18.5 Partition name 54
- 5.18.7 Type of recording 55
- 5.18.8 Number of alarm tracks 55
- 5.18.9 Alarm track size 55
- 5.18.10 Format 56
- 5.19 Recording Profiles 57
- 5.20 Recording Scheduler 59
- 5.20.1 Holidays 60
- 5.20.2 Deleting Holidays 60
- 5.20.3 Time Periods 60
- 5.20.5 Recording status 60
- 5.21 Alarm Sources 61
- 5.22 Alarm Connections 62
- 5.22.4 Destination password 63
- 5.22.5 Video transmission 63
- 5.22.6 Remote port 63
- 5.22.7 Video output 63
- 5.22.8 Decoder 63
- 5.22.9 SSL encryption 64
- 5.22.10 Auto-connect 64
- 5.22.11 Audio 64
- 5.23 VCA 65
- 5.23.1 Analysis 66
- 5.23.2 Analysis type 66
- 5.23.13 Scene too noisy 69
- 5.23.14 Global change 69
- 5.23.15 Reference check 69
- 5.23.16 Select area 69
- 5.24 Alarm E-Mail 70
- 5.24.7 Destination address 71
- 5.24.8 Sender name 71
- 5.24.9 Test e-mail 71
- 5.25 Alarm Task Editor 72
- 5.26 Relay Settings 73
- 5.26.3 Relay follows 74
- 5.26.4 Relay name 74
- 5.26.5 Trigger relay 74
- 5.27 COM1 75
- 5.28 Network 77
- 5.29 Multicasting 81
- 5.29.2 Port 82
- 5.29.3 Streaming 82
- 5.29.4 Multicast packet TTL 82
- 5.30 Encryption 83
- 5.30.1 Encryption 84
- 5.31 Version Information 85
- 5.32 Livepage Configuration 86
- 5.33 System State 89
- 5.34 Licenses 90
- 5.35 Maintenance 91
- 5.35.2 Configuration 92
- 5.35.3 SSL certificate 92
- 5.35.4 Maintenance log 92
- 5.36 Function Test 93
- 6 Operation 95
- 1. Start the Web browser 96
- 6.2 The LIVEPAGE 97
- 6.2.4 View Control 98
- 6.2.5 Digital I/O 98
- 6.2.6 Trigger Relay 98
- 6.2.7 System Log / Event Log 99
- 6.2.8 Audio Function 99
- 6.3 Saving Snapshots 100
- 6.4 Recording Video Sequences 100
- 6.5 Running Recording Program 100
- 6.6 The RECORDINGS Page 101
- 6.6.2 Controlling a Playback 102
- 6.6.3 Buttons 102
- 6.6.4 Slide Control 103
- 6.6.5 Bookmarks 103
- 6.7 Backup 104
- 6.8 Installing the Player 105
- 6.9.1 Installation 106
- 6.9.2 Connecting 106
- 6.9.3 Connecting on Alarm 106
- 7 Maintenance and Upgrades 109
- 7.3 Repairs 110
- 7.4 Transfer and Disposal 110
- 8 Appendix 111
- 8.2 General Malfunctions 112
- 8.4 LEDs 115
- 8.5 Processor Load 116
- 8.6 Serial Interface 116
- 8.7 Terminal Block 117
- 8.8.1 Data Terminal 118
- 8.8.3 Command Inputs 118
- 8.8.4 Assigning an IP Address 119
- 8.8.5 Reboot 119
- 8.8.6 Additional Parameters 119
- 9Glossary 121
- 10 Specifications 125
- 10.2 Protocols/Standards 126
- 11 Index 127
- 128 en 128
- VideoJet X10 Index 129
- 130 en 130
Related products and manuals for Software Bosch X10
Software Bosch MBV-BPRO-40 Operator's Manual
(220 pages)
(220 pages)
Software Bosch 430 Specifications
(17 pages)
(17 pages)
Software Bosch BIS V3.0 User Manual
(8 pages)
(8 pages)
Software Bosch IVA 4.0 User Manual
(4 pages)
(4 pages)
Software Bosch PRS‑SWCS User Manual
(3 pages)
(3 pages)
Software Bosch VP-CFGSFT User Manual
(3 pages)
(3 pages)
© 2020, manymanuals.com. All rights reserved. | 0.567 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals