Bosch 1587DVS User Manual download pdf (Page 9)

4

5

3

0

1

5

0

-9-

CHIP BLOWER

The jigsaw is equipped with a three-position

chip blower to help keep the cutting line clear

of chips. By adjusting the chip blower lever,

the force of the discharged air may be altered

as follows;

Strongest blowing action for working in

woods and similar materials.

Medium blowing action.

No blowing action

DUST EXTRACTION (1587AVS & 1587DVS)

Model 1587DVS is equipped with a dust port

for chip extraction. To use this feature, attach

vacuum hose (optional accessory) to the dust

port connector, than attach the dust port

connectorto the dust port. Connect the other

end of hose to a shop vacuum cleaner with

adapter (optional accessories). For maximum

efficiency, dust covermust be in place.

Model 1587AVS can be converted to dustless

by adding the "Dust Collection Adapter Kit"

which is available from Bosch Service Centers

or Distributors.

FLUSH CUTTING

To allow the saw to make a perpendicular cut

close to a vertical surface, the footplate may

be repositioned as follows. Remove screw (A),

move footplate to the front mounting slot, and

be sure the detent notch is aligned with the

detent slot in the footplate. Re-insert screw (A)

into the threaded hole closest to the detent

notch, and securely tighten. Note that when

the footplate is retracted in this manner, only

90˚cuts are possible, and dust cover or

optional cutting guide may not be used.

45

30

15

0

SCREW (A)

ANGLE SCALE

DETENT NOTCH

* COVER

* DUST PORT

CONNECTOR

* DUST PORT

FOOTPLATE

PLATE

* COVER

FOOTPLATE INSERT

SCREW (B)

SCREW (A)

* Included in "Dust Collection Adapter Kit"

BM 2610993477 2-04 2/9/04 9:24 AM Page 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Comments to this Manuals

No comments