Bosch GTS 10 J Professional User Manual download pdf (Page 29)

English | 29

Bosch Power Tools 1 619 929 J53 | (12.5.11)

Product Description and

Specifications

Read all safety warnings and all instruc-

tions. Failure to follow the warnings and in-

structions may result in electric shock, fire

and/or serious injury.

Intended Use

The power tool is intended as a stationary machine for making

straight lengthways and crossways cuts in hard and soft-

wood, as well as in particle and fibre board. In this, mitre an-

gles from –60° to +60° as well as bevel angles from –2° to

47° are possible.

When using appropriate saw blades, sawing aluminium pro-

files and plastic is also possible.

Product Features

The numbering of the components shown refers to the repre-

sentation of the power tool on the graphic pages.

1 Scale for clearance of the saw blade to the parallel

guide 10

2 Guide groove for parallel guide 10

3 Angle stop

4 Recessed handles

5 Guide groove for angle stop

6.1 Blade guard with clamping lever*

6.2 Blade guard with clamping screw and side protector*

7 Vacuum connection on the blade guard

8.1 Clamping lever for locking blade guard 6.1

8.2 Clamping screw for locking blade guard 6.2

9 Saw table

10 Parallel guide

11 V-guide groove on saw table for parallel guide

12 Mounting holes

13 Carrying handle

14 Saw-Table extension

15 Tensioning lever for saw-table extension

16 Fastening bracket for saw stand GTA 600

17 Locking lever for adjustment of bevel angles

18 Handwheel

19 Crank for lowering and raising the saw blade

20 Safety flap of On/Off switch

Wear ear protectors. Exposure to noise

can cause hearing loss.

Wear safety goggles.

Do not dispose of power tools into house-

hold waste!

Only for EC countries:

According to the European Guideline

2002/96/EC for Waste Electrical and Elec-

tronic Equipment and its implementation

into national right, power tools that are no

longer usable must be collected separately

and disposed of in an environmentally cor-

rect manner.

Observe the dimensions of the saw blade. The hole diameter

must match the tool spindle without play. Do not use reduc-

ers or adapters.

When changing the saw blade, pay attention that the kerf

width is not less than 2.3 mm and the blade thickness not

greater than 2.3 mm. Otherwise, there is danger that the riv-

ing knife (2.3 mm) becomes wedged in the workpiece.

The maximal possible workpiece height is 79 mm.

Left side

Indicates the rotation direction of the

handwheel for lowering (transport

position) and raising (working posi-

tion) the saw blade.

Right side

Indicates the position of the locking le-

ver for locking the saw blade and for

adjusting the bevel angle (saw blade

tiltable).

Symbols and their meaning

If required, lubricate the

power tool at the indicat-

ed locations.

Symbols and their meaning

OBJ_BUCH-1325-002.book Page 29 Thursday, May 12, 2011 1:51 PM

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 354 355

Comments to this Manuals

No comments

Bosch GTS 10 J Professional User Manual Page 29

Comments to this Manuals

Related products and manuals for Tools Bosch GTS 10 J Professional