Bosch WTYH67I9SN Instruction Manual download pdf (Page 15)

Installation and connection en

During installation, ensure that:

■ The dryer is placed on a clean, level

and firm surface,

■ The mains plug can be accessed at

all times,

■ The area around the dryer is kept

clean and

■ The dryer is levelled using the

threaded feet.

Note: Check the alignment of the

appliance with a spirit level and

correct if necessary. Change the

height by turning the appliance feet.

All appliance feet must stand firmly

on the ground.

Incorrect alignment may cause high

noise levels, vibrations and improper

movement of the drum.

Note: If in doubt, have the appliance

connected by a specialist.

Changing the side on which

the door is hinged

Proceed as follows to change

the side on which the door is hinged:

1. Set the programme selector to the

"Off" position, disconnect the dryer

from the mains and open the door.

2. Remove the screws from the dryer

and then remove the dryer door.

Note: Use a T20 (Torx) screwdriver

only. Do not use any other tools to

change the side on which the door is

hinged.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 51 52

No comments

Bosch WTYH67I9SN Instruction Manual Page 15