Bosch WTYH67I9SN Instruction Manual download pdf (Page 43)

Home Connect en

43

Energy management

You can connect your appliance to your

smart energy system (Energy manager).

Once you have connected your

appliance to the smart energy system

(Energy manager) and activated the

Flex Start function, you will be able to

optimise your energy consumption

because your appliance will not start up

until your home photovoltaic system can

provide sufficient energy or the energy

tariff is good.

Further information and system

requirements for using the Energy

manager can be found at: www.home-

connect.com/energymanagement

Notes

■ The smart energy system (Energy

manager) must use the EEBus

initiative communications standard.

■ Before you start, read the smart

energy system instruction manual to

find out how to connect your

appliance to the smart energy

system (Energy manager).

1. Press energy mngmt..

2. Press Connect.

Your appliance now attempts to connect

to the smart energy system (energy

manager).If the appliance has

connected successfully, Connected è

appears in the display.

3. Activate Flexstart if you want the

smart energy system (Energy

manager) to start up your appliance.

Flex Start

Activate the Flex Start function to allow

your smart energy system (Energy

manager) to start your appliance once

your home photovoltaic system is able

to provide sufficient energy or the

energy tariff is good.

Note: Your smart energy system

(Energy manager) cannot start your

appliance until it is connected to the

appliance.

1. Select the programme you require.

2. Press ñ (Ready in).

3. Select the time period you require.

Note: The time period can be set in

1-hour increments up to 24 h.

4. Press A (Start/Pause) .

Delayed start appears in the display.

5. Press } (Remote Start) .

Flex Start appears in the display.

The FlexStart function has now been

activated and the appliance will wait to

be remotely started by the smart energy

system (Energy manager).

: Ready in approx. appears in the

display. The smart energy system

(energy manager) has set a time at

which your appliance can start. The

program will end after the specified

time.

Notes

■ If the smart energy system (Energy

manager) does not start your

appliance, the programme will still

be started before the set time period

ends.

The programme will end when the

time period ends.

'UXPFOHDQDGYLFH

HQHUJ\PQJPW

1RWFRQQHFWHG

&RQQHFW

6RIWZDUHXSGDWH

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 51 52

Comments to this Manuals

No comments