6
Installation/Operating Instructions
Invented for life
QNAK043
(Ex. YPRM67XBN)
Temperature/volume adjustment
1
2
3
QNAK043
(Ex. YPRM67XBN)
1
2
Set Time of day
To set the time of day press and hold the “Set time” button. After 2~3 seconds
the display will show hh:mm (hours:minutes). Advance the time using up or
down arrow.
Set Bath fill Volume
1 To set the “Bath fill” turn ON the controller.
2 Press the “Bath fill”, adjust the water temperature using the UP &
Down arrows, maximum 48°C.
3 Press “Set volume” , adjust water volume using the UP & Down
arrows.
4 Open hot water tap, water heater will automatically stop the water flow
when the selected volume has been delivered. (Check carefully at the
first use to ensure that the correct volume has been selected).
5 Close hot water tap.
6 When water heater has delivered the selected volume, press the
OFF/ON button to cancel the Bath fill.
Comments to this Manuals