Operating the appliance en
43
Cancel the programme
For programmes at high temperatures:
1. Press the A button.
2. To cool down laundry: Select
' Rinse.
3. Press the A button.
For programmes at low temperatures:
1. Press the A button.
2. Select 0 Spin or [ Drain.
3. Press the A button.
Programme end during rinse
hold
In the display panel, $ flashes, and the
preset spin speed and remaining
programme length are displayed for the
selected programme.
Continue the programme by:
■ Pressing the A button or
■ Changing the spin speed, or setting
the programme selector to [ Drain
and then pressing the A button.
Programme end
- 0 - and ÿ appear in the display panel.
The A button indicator lamp is off.
Removing laundry/switching
off the appliance
1. Open the door and remove the
laundry.
2. Press the # button. The appliance is
switched off.
3. Turn off the tap.
Note: Not required for Aqua-Stop
models.
Notes
■ Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
■ Remove any foreign objects from the
drum and the rubber seal – risk of
rusting.
■ Wipe the rubber seal dry.
■ Leave the door and detergent
drawer open so that any residual
water can evaporate. ~ Page 55
■ Always wait until the programme
ends, as the appliance could still be
locked. Then switch the appliance
on and wait for it to unlock.
■ If the display panel goes off at the
end of a programme, the energy-
saving mode is active. Press any
button to activate the panel.
Comments to this Manuals