Bosch WLX20060PL Instruction Manual Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
~
ĭ LF
ĭ LF
ĭ LF
ċ 7
ĭ O :
>
Å
ĭ
2
a
9
Cleaning and care
Detergent solution pump
– Set the programme selector to Wyĥaczenie, pull out the mains plug.
1. Open and remove the maintenance cover.
2. Carefully unscrew the pump cover - do not remove it completely.
3. Let the water drain into a shallow container (let the remainder drip
onto a floor cloth). Repeat the operation until there is no water left.
4. Remove the pump cover. Remove foreign material/fluff from inside the
pump.
5. Clean the interior, pump cover thread and pump housing
(fan impeller in the detergent solution pump must be able to rotate).
6. Refit the pump cover and screw on tightly.
7. Insert the maintenance cover and close it.
To prevent unused detergent from flowing into the outlet during the next
wash: pour 1 litre of water into dispenser II and start the Wirowanie Å
programme.
Filter in the water inlet hose
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except Wirowanie Å and Odpompowaie >
).
3. Press Start/Pauza $. Leave programme running for approx. 40 seconds.
4. Set the programme selector to Wyĥaczenie. Pull out the mains plug.
Clean the filter:
1. Remove the hose from the tap.
Clean the filter with a small brush.
or
Remove the hose from the rear of the appliance.
Remove filter with pliers and clean.
2. Reconnect the hose and check for leaks.
1
2
1
2
Risk of scalding! Allow detergent
solution to cool down!
Turn off the tap!
10
Technical specifications
a= 600 mm
b= 400 mm
c= 850 mm
Net weight: 60kg
Customer service
ʑ
Before calling the customer service, please check whether you can eliminate the fault yourself
a page 11 What to do if...
ʑ
If yor require advice, even during the warranty period, you will incur the costs for the callout
of a technician.
ʑ
The contact details for all countries can be found in the enclosed after-sales service directory
ʑ
When calling customer service, please give the details of your address, telephone number,
fault description, purchase date, product number (E-Nr.) and the production number (FD) of
the appliance to prevent unnecessary call-outs. This will save your additional costs.
These numbers are shown on the rating plate
which can be found on the frame of the open
door and also on the rear of the appliance.
Rely on the professionalism of the manufacturer. Please contact us.
This will ensure that the repair is carried out by trained service technicians who arrive
equipped with genuine spare parts for your appliance.
a
b
c
E-Nr. FD
Product number Production number
ʑ
ʑ
a
ʑ
Å
>
ʑ
ĥ
$
ʑ
ĥ
a
ʑ
a
ʑ
ʑ
ʑ
Ċ 7
ʑ
a
ʑ
ʑ
a
a
ʑ
ʑ
ʑ
ĥ
ʑ
ʑ
ĥ
Page view 6
1 2 3 4 5 6 7 8

Comments to this Manuals

No comments