Display en
21
--------
Symbol Description Information
Programme status: Lit: status indicator
Š Drying
ö Dryness level:
Iron Dry
» Dryness level:
Cupboard Dry
Ò Dryness level:
Cupboard Dry Plus
Q Anti-Crease
-˜- Pause
“Ÿš Programme end
‹ ‹ : ‹ ‹ Programme duration Expected programme duration in hours and minutes.
e.g. ñ 02:45 Programme delay Appears when altering and activating the "Ready in"
time
ð Empty the condensation con-
tainer ~ Page 31
■ Empty the condensation container and then reinsert
it.~ Page 31
Then press A (Start/Pause).
■ Clean the filter in the condensation container.
■ If the optional drain hose* is installed, make sure
that the drain hose:
– Is correctly connected. ~ Page 36
– Is not kinked or bent.
– Is not blocked or clogged, e.g. by deposits.
■ Run the intensive appliance care programme.
■ Check that no debris has found its way into the base
unit. Open the maintenance flap and remove any
debris.
å Fluff filter Remove the fluff ~ Page 32
ó
ªªª
Automatic heat exchanger
rinse
Rinsing progress indicator
The heat exchanger is cleaned automatically. Do not
pull out the condensation container while this is dis-
played.
’‘§“ Basic appliance care pro-
gramme
Not a fault. After a certain period, the appliance will auto-
matically recommend that you run the basic appliance
care programme. Run the basic appliance care pro-
gramme. ~ Page 45
œ Appliance settings Alter the appliance settings ~ Page 34
Comments to this Manuals