Bosch MCM 5000 UC Owner's Manual download pdf (Page 23)

TROUBLESHOOTING

Problem Possible Cause Remedy

Power 1.A circuit breaker may have Reset circuit breaker or

unit does tripped or a fuse has blown replace fuse.

not in the power supply circuit.

function

2.Safety motor drive cover is Place safety motor drive cover on

not in place on high speed, high speed blender drive.

blender drive, when dual

drive is being used.

3.The built-in safety cutout If the safety has tripped due to

may have tripped. overheating:

> Turn the power unit to the Off

position, “O/Off,” and unplug.

> Remove the attachment that was

in use when safety tripped, and

correct whatever the situation

is that caused the safety to trip.

> Contact Bosch Small Appliances

Customer Support, see page 22,

for closest Bosch authorized

service center.

> Take, or ship, the food processor

to a Bosch authorized service

center to have the safety cutout

replaced.

Rotary switch 1.Safety cover interlock is not Safety cover interlock must be

will not turn engaged. engaged before rotary switch can

be turned. Rotate bowl cover or

juicer tab clockwise until interlock

tabs clicks into place.

Power 1.The motor has become > Turn the power unit to the Off

unit hums blocked; that is, the position, “O/Off,” and unplug.

but attachment being used has > Remove the attachment

nothing is become jammed. that was in use and correct

moving whatever the situation is that

is causing the blockage.

> Reinstall the attachment and

resume use per attachments

instructions.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

No comments

Bosch MCM 5000 UC Owner's Manual Page 23