Bosch DIC043650 Instruction Manual download pdf (Page 18)

18

If you encounter a problem

If you have any questions or if a fault

occurs, please call Customer Service.

(See list of Customer Service

representatives).

When you call, please quote the following:

E-Nr. FD

Enter the relevant numbers into the box

above. The E-Nr. (product no.) and FD

(production date) are shown on the

nameplate which can be seen inside the

extractor hood after the ﬁlter frame has

been detached.

The manufacturer of the extractor

hoods accepts no liability for complaints

which can be attributed to the design

and layout of the pipework.

Replacing the light bulbs

1. Switch off the extractor hood and pull

out the mains plug or switch off the

electricity supply at the fuse box.

 When switched on, the halogen bulbs

become very hot. Even for some time after

the bulbs have been switched off there is

still a risk of burns.

2. Using a screwdriver, carefully remove the

halogen bulb.

Attention: If the halogen bulb is not

removed properly, the appliance may be

damaged.

3. Replace the halogen bulb (commercially

available halogen bulb 12 V, max. 20 W,

G4 bulb holder). Ensure that the

contacts are in the correct position.

Attention: Take hold of the halogen bulb

with a clean cloth.

4. Plug the appliance into the mains or

switch it on at the fuse box.

Note: If the light does not function, check

that the bulbs have been inserted correctly.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 99 100

Comments to this Manuals

No comments