Bosch DKE 96 . . Installation Manual download pdf (Page 7)

English 5

in screw holes so that they are flush with the wall.Note: At least one screw must

be installed through a stud. Leave a 3/8” (6 mm) of each screw exposed.

4) Attach Chimney Mounting

Bracket

Attach spacers to holes on chimney mounting bracket arms, as seen in “Attach

Mounting Brackets” on page 5.

Attach chimney mounting bracket to wall through chimney screw holes created in

previous step. Use two screws.

5) Hang the Hood Place the hood by sliding the mounting holes in the top of the hood over the top

hood screws. Check and adjust for level. Tighten the screws.

Figure 3: Prepare Wall

lower hood screw holes

upper hood screw holes

chimney screw holes

centerline

template

30" min.

Figure 4: Attach Mounting Brackets

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

No comments

Bosch DKE 96 . . Installation Manual Page 7