Bosch AHS 52 Accu Operations Instructions Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 71
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
English - 2
The product is intended for cutting and trimming
hedges and bushes in domestic use.
This manual gives instructions on the correct as-
sembly and safe use of your hedgecutter. It is impor-
tant that you read these instructions carefully.
Carefully remove the machine from its packaging
and check for complete contents:
Hedgecutter
Blade guard
Operating instructions
Battery (AHS 52 Accu 2x)
Battery charger
When parts are missing or damaged, please contact your
dealer.
1
Cutting blade
2
Front handle guard
3
Front handle switch lever
4
Rear handle with switch lever
5
Battery
6
Ventilation slots
7
Blade guard
8
Battery charger
9
Charging compartment
10
LED
11
Mains plug
12
Serial Number
13
Battery unlocking button
Not all of the accessories illustrated or described are
included as standard delivery.
Charging Procedure
The charging procedure starts as soon as the mains
plug
11
is plugged into the socket and the battery
5
is inserted into the charging compartment
9
.
The green LED 10 is not a charge control indica-
tor!
When the green LED is lit, it indicates that a
charging current flows.
After the end of the charging process (approx. 3 h
4 h), pull the mains plug of the battery charger from
the socket and remove the battery.
A temperature increase of the battery indicates that
it is fully charged.
Charging Advice
With continuous or several repetitive charging cy-
cles without interruption, the charger can warm up.
This is not harmful and does not indicate a technical
defect of the unit.
Product Specification
Hedgecutter
AHS 41 Accu AHS 52 Accu
Part number (TYP)
0 600 839 1.. 0 600 839 4..
No-load stroke rate [spm] 1 100 1 100
Cutting length [mm] 410 520
Cutting width [mm] 15 15
Weight [kg] 2.5 2.6
Battery type
NiCd NiCd
Voltage
[V] 14.4 14.4
Battery rating [Ah] 1.5 1.5
Number of batteries 1 2
Run time per battery [min] 50 50
Charging time [h] 3–4 3–4
Battery charger
AL 1404 AL 1404
Charging current
[A] 0.4 0.4
Allowable charging temperature range [°C] 0–45 0–45
Intended Use
Introduction
Delivered Items
Operating Controls
For Your Safety
Warning! Switch off, remove battery from ma-
chine before adjusting or cleaning.
The blades continue to move for a few frac-
tions of a seconds after the hedgecutter is
switched off. Caution! Do not touch the mov-
ing blades.
2 609 932 402 - GB Seite 2 Dienstag, 13. April 2004 4:05 16
12 • 2 609 932 402 • TMS • 13.04.04
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 70 71

Comments to this Manuals

No comments