Bosch GAS 50 M Operations Instructions download pdf (Page 18)

18 | English

1 609 929 V18 | (1.3.10) Bosch Power Tools

Declaration of Conformity

We declare under our sole responsibility that

the product described under “Technical data” is

in conformity with the following standards or

standardization documents: EN 60335 and the

directives 2006/42/EC, 2004/108/EC including

their amendments.

Technical file at:

Robert Bosch GmbH, PT/ESC,

D-70745 Leinfelden-Echterdingen

Robert Bosch GmbH, Power Tools Division

D-70745 Leinfelden-Echterdingen

30.12.2009

Assembly

f Before any work on the vacuum cleaner it-

self, pull the mains plug.

Mounting the Handle

The vacuum cleaner cart is designed in such a

manner, that the vacuum cleaner can be pushed

easier with the push handle 16. Always grasp

the push handle 16 with both hands when push-

ing the vac.

Insert the push handle 16 into the 2 openings of

the container 11. Push the clamps 15 through

the corresponding holes of the push handle 16

and then lock the clamps 15.

The casters are equipped with brakes 12. To ac-

tuate the castor brake 12 press the lever down-

wards.

Replacing/Inserting the Dust Bag

(see figure A)

– Unlock the latches 13 and remove the vacu-

um lid 3.

– Pull off the full dust bag 17 from the connec-

tion flange toward the rear. Close the open-

ing of the dust bag by folding down the lid.

Remove the closed dust bag from the vacu-

um cleaner.

– Slide the new dust bag 17 over the connec-

tion flange of the vacuum cleaner. Make sure

that the full length of the dust bag 17 faces

against the inner wall of the container 11.

Reattach the vacuum lid 3.

–Lock the latches 13.

For dry vacuuming operation, a dust bag 17

should be inserted. When operating with a dust

bag 17, the folded filter 18 clogs slower, the vac-

uuming performance is kept up longer and the

disposal of dust becomes easier.

When materials not hazardous to one’s health or

materials with or without an exposition value of

≥ 1mg/m

3

according to dust category L (until

now application category U) are being vacu-

umed, it is possible to vacuum directly into the

container.

When the warning light 4 flashes during IS oper-

ation and/or the alarm sounds during ENT oper-

ation, the folded filters 18 must be cleaned. For

this, set the mode selector switch 6 to the elec-

tromagnetic filter cleaning symbol. The folded

filters are cleaned for approx. 10 seconds.

If the warning light 4 should continue to flash

and/or the alarm should continue to sound, the

dust bag 17 must be exchanged.

When the warning light 4 still continues to flash

and/or the alarm continues to sound, the vacu-

um cleaner must be checked as described under

“Malfunctions”.

f The vacuum cleaner contains materials that

are hazardous to one’s health. Have the

emptying and maintenance, incl. the dispos-

al of dust-collection containers, carried out

only by specialists. Appropriate protective

equipment is required. Do not operate the

vacuum cleaner without the complete filter

system. Otherwise there is danger to your

own health.

Dr. Egbert Schneider

Senior Vice President

Engineering

Dr. Eckerhard Strötgen

Head of Product

Certification

OBJ_BUCH-877-003.book Page 18 Monday, March 1, 2010 12:48 PM

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 238 239

Comments to this Manuals

No comments