Bosch F.01U.278.516 User Manual download pdf (Page 19)

Relay Unit Programming | en 19

Bosch Security Systems User Manual F.01U.278.516 | V1.0 | 2012.11

4.2 First use

4.2.1 List of original factory settings

* Locating mode and identification number are set at first use. To change a value, reset the

unit. See Section 4.3.2 Resetting all the parameters and buffers, page 20.

4.2.2 Parameters set by the Main Unit

The parameters listed below are programmed in the Main Unit and are applied to the Relay

Unit. See the Main Unit user manual.

–Display mode

–Unit language

– Date and time

– Local acknowledgement and the access code

– Output relay function and mode

4.2.3 Locating mode and identification number

1. Disconnect the Relay Unit from the RS-485 bus.

2. Switch the Relay Unit on with the switch located at the bottom of the unit. Wait for the

following display to appear:

3. Enable (ON) or disable (OFF) the indication of the transmitter position (locating mode)

on the Relay Unit display. It must be the same as in the Main Unit.

 Press to disable or to enable the locating mode.

4. The identification number of the Relay Unit must now be attributed.

The identification number is attributed by the Main Unit upon connecting the RS-485 bus

corresponds to the order of connection. It can also be set manually. The range for this value is

(A, B, C, ..., Y, Z, a, b, c, d, e, f) for a maximum of 32 Relay Units.

Automatic attribution by the Main Unit

5.a. Press or the Red button to erase any previous selection. The black box remains.

5.b. Connect the Relay Unit to the RS-485 bus. Press or the Green button to enable the

automatic attribution. The next free identification number is attributed by the Main Unit and is

displayed on the Relay Unit at the bottom right.

Parameter Original Factory Setting Page

* Locating mode On 19

* Identification number No value 19

Assistance and fire priority No 20

Speaker volume Midrange 21

LOCATING ?

(OFF/ON )

RELAY UNIT ID: ·

( + / - )

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

No comments

Bosch F.01U.278.516 User Manual Page 19