Bosch BOVA-36HN1-M18M User Manual Page 33

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 32
Installation Instructions Bosch IDS BOVA | 33
Bosch Thermotechnology Corp. | 12.2016
Data subject to change
Error Code Description
P6 IPM module protection
H4 System lockup, 3 times (P6/L0-9) protection in 60 minutes
L0-L9 IPM module protection (the same as P6, only for analysis)
Table 22
When P6/L0-L9 appears occasionally, you don`t need to do anything, the system will
restart automatically after 6 minutes, of course, if you check the system of running,
it will be better.
P6/L0-L9 ( IPM module protection)
H4 ( System lockup, 3 times (P6/L0-9) protection in 60 minutes)
Diagnosis Handling
Check whether the service
valves are open
Yes
Yes
Check whether compressor
insulation resistance is greater
than 100KΩ
Yes
Check whether the resistance of
compressor U/V/W are normal
Yes
Check whether there is the
same fault
Open the service valves
No
No
No
Keep running
No
Yes
Replace the board and
check whether there is the
same fault.
Keep running
No
Yes
Yes
Replace the compressor and
check whether there is the
same faultt
Keep running
No
Replace the compressor
No
Check whether the compressor
wiring is normal
Reseat the wiring according
to wiring diagram
Replace the compressor
Figure 62
Error Code Description
AtL Ambient Temperature Limited
Table 23
When the ambient temperature returns to within the operating range, the
system recovery automatically.
AtL ( Ambient Temperature Limited)
Diagnosis
Handling
No
Yes
No
Yes
No
Yes
Check whether the ambient
temperature is beyond the range
cooling:40°F-120°F
heating:5°F-86°F
Normal
Check whether sensor T4 are
seated and normal (T4 for
Heat Pump only)
Unplug the sensor, Check
whether the resistance of T4
is in the range of Table 1
You need do nothing. Try to
start again
Reseat the sensor according
to wiring diagram
Replace the fault T3/T4
sensor
Figure 63
Page view 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 43 44

Comments to this Manuals

No comments