Bosch PKC875N14D User Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 9
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
de
Ø Montageanleitung
Das müssen Sie beachten
Elektrischer Anschluss: nur durch konzessionierten Fach-
mann. Bei Falschanschluss erlischt die Garantie.
Einbau: nur fachgerecht, bei Schäden haftet der Monteur.
Anschlussart: das Gerät entspricht der Schutzklasse I und darf
nur in Verbindung mit Schutzleiteranschluss betrieben werden.
Installation: in der Installation muss ein allpoliger Trennschalter
mit 3 mm Kontaktöffnung vorhanden sein.
Unterbau: keine Kühlgeräte, Geschirrspüler, unbelüftete Backö-
fen, Waschmaschinen unterbauen.
Modular- /Kompakt-Geschirrspüler der gleichen Marke können
untergebaut werden. Arbeitsplattendicke mindestens 40 mm.
Wird unter dem Kochfeld ein Backofen eingebaut, kann die
Arbeitsplattendicke von den Maßangaben in dieser Anleitung
abweichen. Beachten Sie die Hinweise in der Montageanleitung
des Backofens.
Zwischenboden: wenn die Kochfeldunterseite berührbar ist,
muss ein Zwischenboden montiert werden.
Fragen Sie im Fachhandel nach einem Zwischenboden als
Zubehör.
Wenn Sie einen eigenen Zwischenboden verwenden, muss der
Mindestabstand zum Netzanschluss des Gerätes 10 mm betra-
gen.
Arbeitsplatte: eben, waagrecht, stabil.
Möbel vorbereiten - Bild 1
Einbaumöbel: mindestens 90°C temperaturbeständig.
Ausschnitt: Mindestabstand zu seitlichen Wänden: 70 mm.
Nach Ausschnittarbeiten Späne entfernen.
Schnittflächen: hitzebeständig versiegeln.
Befestigungsschienen anbringen - Bild 2
Geflieste Arbeitsplatten: untere Schraublöcher verwenden.
Granit oder Marmor Arbeitsplatten: Dübel oder Buchsen für
die Befestigungsschrauben setzen, oder Befestigungsschienen
ankleben.
Kochfeld anschließen und einsetzen - Bild 3
Vor Geräteanschluss Hausinstallation überprüfen.
A: Gerät mit 3-adriger Anschlussleitung: Farbcodierung der
Netzanschlussleitung: grün-gelb = Schutzleiter
<, blau = (Null)
Neutral-Leiter, braun = Phase (Aussenleiter).
Auf geeignete Absicherung der Hausinatallation achten. Im
Bedarfsfall durch Leitung für mehrphasigen Anschluss ersetz-
ten. Bei Austausch der Leitung siehe B:
B: Gerät ohne Anschlussleitung: nur nach Anschlussbild
anschließen. Bei Bedarf beiliegende Kupferbrücken montieren.
Netzanschlussleitung: Typ H05 VV-F oder höherwertig. Die gelb-
grüne Ader für den Schutzleiter-Anschluss muss geräteseitig
10 mm länger sein, als die anderen Adern.
C: Gerät mit vormontierter5-/6-adriger Anschlussleitung: nur
ein geschulter Kundendienst-Techniker darf die Anschlusslei-
tung austauschen.
Einsetzen: Anschlussleitung nicht einklemmen, nicht über
scharfe Kanten führen. Bei untergebautem Backofen Leitung an
den hinteren Ecken des Backofens zur Anschlussdose führen.
Hinweis: erscheint im Display des Gerätes
—…‹‹ ist es falsch
angeschlossen. Gerät vom Netz trennen, Anschluss überprüfen.
Geflieste Arbeitsplatten: Fliesenfugen mit Silikonkautschuk
abdichten.
Kochfeld ausbauen: Das Gerät spannungslos machen. Koch-
feld von unten herausdrücken.
en
Ú Installation instructions
The following must be noted
Electrical connection: To be carried out only by a licensed
expert. Incorrect connection will invalidate the warranty.
Installation: To be carried out only by a professional. The fitter
is liable for any damage.
Connection type: The appliance fulfils the requirements of
protection class I and may only be operated in conjunction with
an earth conductor.
Installation: An all-pole isolating switch with at least a 3 mm
contact gap must be included in the installation.
Support: Refrigerators, dishwashers, non-ventilated ovens and
washing machines must not rest on a support.
Modular/compact dishwashers of the same brand can rest on a
support. Work surface thickness must be at least 40 mm.
If an oven is being installed underneath the hob, the work
surface thickness may differ from the dimensions given in these
instructions. Observe the information in the oven installation
instructions.
Partition floor: If the underside of the hob can be touched, a
partition floor must be fitted.
Ask your specialist retailer for a partition floor as an accessory.
If you use your own partition floor, the minimum distance to the
mains connection of the appliance must be 10 mm.
Work surface: Level, horizontal, stable.
Preparing the units - Figure 1
Fitting unit: Heat resistant to at least 90°C.
Cut-out: Minimum distance to the side walls: 70 mm.
After the cutting out work is complete, remove the shavings.
Cut surfaces: Seal with heat-resistant material.
Attaching securing rails - Fig. 2
Tiled work surfaces:: Use the lower screw holes.
Granite or marble work surfaces: Insert wall plugs or sockets
for the securing screws or affix securing rails.
Connecting and fitting the hob - Fig. 3
Before connecting the appliance, check the household
installation.
A: Appliance with 3-wire power cable: Colour coding of the
power cord: green-yellow = earth
<, blue = (zero) neutral,
brown = live (external conductor).
Make sure that the household installation has sufficient fuse or
circuit breaker protection. If necessary, replace with a cable for
a multiphase connection. When replacing the cable, see B:
B: Appliance without power cable: Only connect in accordance
with the connection diagram. If necessary, fit the copper bridge
supplied. Power cord: Type H05 VVF or higher rated. The
yellow/green wire for the PE connection must be 10 mm longer
than the other wires on the appliance side.
C: Appliance with prefitted 5 or 6-wire power cable: The power
cable must only be replaced by a trained after-sales engineer.
Installing: Do not trap the power cable and do not route it over
sharp edges. If the oven is a built-under type, route the cable on
the rear corners of the oven to the socket.
Note: If
—…‹‹ appears in the display, the appliance has not
been connected correctly. Disconnect the appliance from the
mains and check the connection.
Tiled work surfaces: Seal the tile joints with silicone rubber.
Removing the hob: Disconnect the appliance from the power
supply. Push out the hob from below.
Page view 1
1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments