Bosch ROTAK 34 Instruction Manual download pdf (Page 3)

English | 3

Bosch Power Tools F 016 L81 043 | (20.9.13)

 Keep supply cables and extension cables away from

the blade. The blade can cause damage to the cables and

lead to contact with live parts. Beware electric shock haz-

ard.

 Do not modify this product. Unauthorized modifications

may impair the safety of your product and may result in in-

creased noise and vibration.

 Avoid mowing in bad weather conditions especially when

there is a risk of lightning.

Remove the plug from the socket:

– whenever you leave the machine,

– before clearing a blockage,

– before checking, cleaning or working on the machine,

– after striking a foreign object. Inspect the machine for

damage and make repairs as necessary,

– if the machine starts to vibrate abnormally (check immedi-

ately).

Power supply

 The voltage indicated on the rating plate must correspond

to the voltage of the power source.

 We recommend that this equipment is only connected into

a socket which is protected by a circuit-breaker that would

be actuated by a 30 mA residual current.

 Only use or replace power supply cables for this unit which

correspond to the types indicated by the manufacturer.

 Never touch the mains plug with wet hands.

 Do not run over, crush or pull the power supply cable or ex-

tension lead, otherwise it may be damaged. Protect the ca-

ble from heat, oil and sharp edges.

 The extension lead must have a cross section in accord-

ance with the operating instructions and be protected

against splashed water. The connection must not be in wa-

ter.

Electrical Safety

 Warning! Switch off, remove plug from mains before

adjusting, cleaning or if cable is cut, damaged or entan-

gled.

 The blades continue to rotate for a few seconds after

the machine is switched off.

 Caution – do not touch the rotating blade.

Your machine is double insulated for safety and requires no

earth connection. The operating voltage is 230 V AC, 50 Hz

(for non-EU countries 220 V, 240 V as applicable). Only use

approved extension cables. Contact your Bosch Service Cen-

tre for details.

Extension cords/leads should only be used if they comply

with H05VV-F, H05RN-F types or IEC type design (60227

IEC 53, 60245 IEC 57).

If you want to use an extension cable when operating your

product, only the following cable dimensions should be used:

–1.0mm

: max. length 40 m

–1.5 mm

: max. length 60 m

–2.5 mm

: max. length 100 m

Note: If an extension cable is used it must be earthed and con-

nected through the plug to the earth cable of your supply net-

work in accordance with prescribed safety regulations.

If in doubt contact a qualified electrician or the nearest Bosch

Service Centre.

 WARNING! Inadequate extension cables can be dan-

gerous. Extension cable, plug and socket must be of

watertight construction and intended for outdoor use.

It is recommended for increased electrical safety to use a Re-

sidual Current Device (RCD) with a tripping current of not

more than 30 mA. Always check your RCD every time you use

it.

If the supply cord is damaged, please contact your nearest

Bosch Service Centre.

For products not sold in GB:

WARNING: For your safety, it is required that the plug at-

tached to the machine is connected with the extension cord.

The coupling of the extension cord must be protected against

splash water, be made of rubber or coated with rubber. The

extension cord must be used with a cable strain relief.

The connection lead must be inspected for signs of visible

damage and ageing at regular intervals and may only be used

if in perfect condition.

Products sold in GB only: Your product is fitted with a

BS 1363/A approved electric plug with internal fuse (ASTA

approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be

cut off and an appropriate plug fitted in its place by an author-

ised customer service agent. The replacement plug should

have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible

shock hazard and should never be inserted into a mains sock-

et elsewhere.

Maintenance

 Always wear gardening gloves when handling or work-

ing near the sharp blades.

 Keep all nuts, bolts and screws tight to be sure that the ma-

chine is in safe working condition.

 Check the grass catcher frequently for wear or deteriora-

tion.

 Examine the machine and replace worn or damaged parts

for safety.

 Ensure replacement parts fitted are Bosch approved.

Symbols

The following symbols are important for reading and under-

standing the operating instructions. Please take note of the

symbols and their meaning. The correct interpretation of the

symbols will help you to use the garden product in a better

and safer manner.

Symbol Meaning

Movement direction

OBJ_BUCH-2040-001.book Page 3 Friday, September 20, 2013 10:44 AM

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Bosch ROTAK 34 Instruction Manual Page 3

Comments to this Manuals

Related products and manuals for Lawnmowers Bosch ROTAK 34