Bosch D9210C User Manual download pdf (Page 6)

GV4 Series Control Panel | Release Notes

6 Bosch Security Systems, Inc. | 11/11 | F01U261045-01

 The GV4 Ser

ies control panels support the

B820 Inovonics Interface Module on the SDI2

bus. The B820 Inovonics Interface Module is

technology, which ensures superior range,

reliability, and scalability for commercial

applications. Using a wide range of

transmitters and repeaters, this proven

technology provides flexibility and

performance to meet the most stringent

requirements.

RF Repeaters

 The GV4 Ser

ies control panel supports up to

8 RF repeater modules. Each module is

individually powered and reports battery and

AC status to the control panel.

2.1.11 Keypad Programming

Module Encryption Parameters (AES

Encry

ption Key Size)

 Each B420 Ethernet Communications Module

can independently and optionally support

128-bit AES Encryption for RPS and central

station communication.

AES Encryption Key

 Th

e ability to display, add, and modify the

AES encryption key is available in both

keypad programming and through RPS.

Points

 Poin

t Index and Point Source assignments

can be made or removed through Installer

Keypad Tools.

Inovonics Interface Module Management

 A keypad Tools Menu provides a means to

roll or replace wireless devices on

premises. This menu also allows the installer

to manually enter the RFID of wireless

devices.

 The GV4 series control panels limit the total

number of wireless devices (not including

repeaters) to 350.

Routing Parameters

 Thr

ough the use of the B420, DX4020, and

ITS-DX4020-G Network Interface modules, the

GV4 control panel routing options comprise

16 routes to 4 network receivers and 4 phone

routes.

 When a SDI2 or SDI communication module is

used in a central station reporting route, it is

automatically supervised on its corresponding

bus. Any loss of bus communication is

annunciated on the keypads as a Missing

Device and reported if possible.

If a B420 Ethernet Communications Module

used at SDI2 address 1 or SDI2 address 2

has been configured as an automation

interface module, then that module can not

be used for central station nor RPS

communication.

Firmware Authorization

 If enabled, local authorization for control

panel firmware updates can be granted

through the Service User Menu. Accessed by

pressing [9][9][ENTER] at a keypad.

View Service Bypass

 To facilita

te system maintenance for the

Service User, a special point bypass option is

provided to remove selected points from

service. The status of points in Service Bypass

can be viewed through the View Service

Bypass menu. Accessed by pressing

[9][9][ENTER] at a keypad.

Installer Menu

 When

the Reset Switch is in the closed

position, a D1260 series keypad on SDI

address 8 and a D1255 keypad on SDI

address 16 will be automatically enabled. One

of they keypads can be used to access the

Installers Menu with the Installers passcode.

 The Installers Menu has the following options:

View Log, Print Log, Display Revision, Service

Walk Test, Default Text, View Service Bypass,

Tools Menu and authorize Firmware Update.

Tools Menu Description

 The Keypad Programming menu,

introduced

on the GV3 series control panels, is

accessible through two methods. From the

Service Menu, access the Tools Menu and

then scroll through the options to find the

Programming sub-menu. You can also access

the Programming menu from within the

Installer menu.

 The Tools Menu requires authentication by

the Service Users passcode before use. This

is enabled by default and cannot be change.

 The Tools Menu includes sub-menus for

Keypad Programming, Service Bypass, RF

Points, RF Repeaters, RF Diagnostics, and IP

Diagnostics.

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments

Bosch D9210C User Manual Page 6

Comments to this Manuals

Related products and manuals for Networking Bosch D9210C