Bosch DIP-2042-4HD Installation Manual download pdf (Page 24)

See also:

– Obtainging a basic configuration, page 20

– Advanced configuration, page 21

Recovering the unit

Following procedure describes how to restore the factory

default image.

Notice!

Before recovering DIVAR IP we recommend backing up the

configuration.

To restore the unit to factory default image

1. Start the unit and press F7 during the BIOS power-on-self-

test.

The Recovery menu is displayed.

Notice!

Make sure that a VGA monitor, a keyboard and a mouse are

connected to the unit.

2. Select one of the following:

– Initial to factory image (all data will be deleted)

(restores to factory default image and deletes all data

on the HDDs)

– Restore to Factory image (all data will not be

deleted)

(restores to factory default image; data on the HDDs

will not be deleted)

Note:

Windows performs the setup. The screen displays the

percentage of the process.

8.2

24 en | Maintaining the system DIVAR IP 2000

2014.07 | V1 | DOC Bosch Sicherheitssysteme GmbH

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 39 40

No comments

Bosch DIP-2042-4HD Installation Manual Page 24