Bosch D720 User's Guide download pdf (Page 18)

Reset Sensors

 I have this feature.

 I do not have this feature.

 This feature requires a passcode.

Command 47 resets faulted detection devices. Devices can include smoke

detectors, shock sensors or a variety of other detection devices. Ask your alarm

technician which points you can reset from the keypad by entering Command

47.

COMMAND 4 7

To reset detectors:

1. Ensure your security system is disarmed.

2. Press the [COMMAND] bar. The Command mode indicator light

comes on.

3. Press the [4] key, and then press the [7] key. The display flickers

momentarily and the keypad emits multiple pips during reset.

If you enter this function and the detector or sensor resets momentarily but then

returns to a faulted condition, the conditions causing the activation can still be

present or the detector is faulty. Check to be certain there is no smoke, fire, or

other danger present.

If you cannot reset the detector or sensor, contact your security company.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

No comments

Bosch D720 User's Guide Page 18