Bosch D720 User's Guide download pdf (Page 28)

Turning the System On With a Duress Passcode

 I have this feature.

 I do not have this feature.

 This feature requires a passcode.

A duress passcode sends a silent alarm signal to your security company. It arms

or disarms the security system just like your personal passcode; however, as the

system is armed or disarmed, an alarm signal is transmitted. Be sure your security

technician explains how this feature works in your system. There is no alarm tone

or visual indication at the premises that the report is sent.

Application

The duress passcode is used when someone threatens you and demands you

disarm (or arm) your security system. By disarming (or arming) with a duress

passcode, your security company is alerted of an alarm situation.

Passcode + 1, or + 2

The duress passcode is based on your personal passcode. By increasing the last

digit by one or two, the duress feature is activated. For example; If your personal

passcode is 1234, the duress passcode is 1235 (or 1236).

 My system uses Passcode + 1 for duress.

 My system uses Passcode + 2 for duress.

Note: If your system has a security passcode that unlocks the [COMMAND] bar,

increasing the last digit of that passcode sends a duress signal to your

security company.

Important! Be sure to press the [ENT] key after entering the duress passcode.

1 2 ... 23 24 25 26 27 28 29 30 31 32

No comments

Bosch D720 User's Guide Page 28