Bosch OS50VC Use and Care Manual download pdf (Page 8)

Always disconnect the plug

from the power source before

attaching or removing abrasive sheets.

ATTACHING REGULAR SANDING SHEETS

USING SHEETLOC™ SYSTEM

The Bosch-Exclusive Sheetloc Supreme™

Sandpaper Attachment System pulls regular

abrasive sheets (sandpaper) flat and tight

before clamping to prevent wrinkles, creases

and tears for optimal sanding performance and

longer paper life. Patents Pending

1. While p

ressing the rear clamp release lever,

insert the abrasive sheet (grit side down)

between the rear clamp and base plate.

Make sure that sheet is centered under the

rear clamp and inserted deep enough to be

fully under the rear clamp, then release the

lever (Fig. 2).

2. To open the front clamp, press the front

clamp lever out from the tool (Fig. 3).

3. Wrap the abrasive sheet around the length

of the pad and

slide free end of sheet under

the front clamp’s black bar. Flatten the

abrasive sheet by pushing it as far to the

b

ack as possible, then the move the front

clamp lever to the base plate and lock it in

place. This action pulls the abrasive taut

while clamping, which prevents wrinkles,

creases and tears (Fig. 4).

REMOVING REGULAR SANDING SHEETS

Simply press the rear clamp lever and release

the front clamp lev

er to release the abrasive

sheet (Fig. 2 & 3).

REPLACEMENT OF BACKING PAD

The backing pad can be replaced if needed.

Remove the six M4 screws and remove the

worn pad. Position the new pad over the screw

holes, insert the screws and tighten (Fig. 5).

ATTACHING PSA “STICK-ON”

ABRASIVE SHEETS

Your sander can also be used with PSA-

backed “stick-on” abrasive sheets

(sandpaper), which have pressure sensitive

adhe

sive.

1. Peel protective sheet from the back of PSA

sheet.

2. Align PSA sheet with backing pad and

press firmly in place.

-8-

!

WARNING

Assembly

FIG. 4

F

FIG. 5

FIG. 3

REAR CLAMP

SHEETLOC SUPREME™

REAR CLAMP LEVER

SHEETLOC SUPREME™

FRONT CLAMP LEVER

FIG. 2

M4 SCREW

BACKING

PAD

SANDING

SHEET

SANDING

SHEET

BM 2609932873 11-12_BM 2609932873 11-12.qxp 11/27/12 10:48 AM Page 8

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

Comments to this Manuals

No comments