Bosch PRS-1AIP1 Service Manual download pdf (Page 31)

Serial (RS-232/RS-485)

This function is used for end-to-end serial data tunnelling with relatively low speed. This

function is typically used for remote control, e.g. Pan/Tilt/Zoom control of a camera.

Figure 6.11: Serial (RS-232) screen default

Select either the RS‑232 or the RS‑485 port. Select the communication parameters as needed

by the application and the connected devices. The serial parameters can be chosen

independently at both ends of the communication. When tunneling, only the data is

transmitted end to end, the RS‑232/RS‑485 control signals are only of local significance.

The serial input is automatically detected and the device supports both binary and formatted

data streams.

All data received from the network in one IP packet will be transmitted in one block without

framing, formatting or the addition of extra characters.

Submit / Cancel button

Submit saves the set values, restarts the device and returns back to the last screen. Cancel

restores the last submitted values.

6.2.10

IP Audio Interface Configuration | en 31

Bosch Security Systems B.V. Operating Manual 2013.03 | V2.0 |

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

No comments

Bosch PRS-1AIP1 Service Manual Page 31